Sikaflex-508, Low Emission Multipurpose STP Sealant, Interior & Exterior, Black, Packing: 300 mL
Sikaflex-508, Low Emission Multipurpose STP Sealant, Interior & Exterior, Black, Packing: 300 mL
Sika
Sikaflex-508, Low Emission Multipurpose STP Sealant, Interior & Exterior, Black
Sikaflex-508, Low Emission Multipurpose STP Sealant, Interior & Exterior, Black
0,00 €
fără TVA
1,00 lei
| Low emission multipurpose STP sealant Sikaflex-508 is a low emission one-component isocyanate free sealant based on the Sika Silane Terminated Polymer (STP) technology which cures on exposure to atmospheric humidity. Sikaflex-508 meets the most severe environment, health and safety standards and sets a new benchmark in this technology.
| |||||||||||||||||||||||||||||||||||||||||||||
PRODUCT BENEFITS
UsageSikaflex-508 is a low modulus multipurpose sealant for internal and external applications. It adheres well to a wide variety of substrates and is especially compatible with foamed polystyrene foams (XPS). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex-508 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.Packaging
| |||||||||||||||||||||||||||||||||||||||||||||
Typical Product Data
| |||||||||||||||||||||||||||||||||||||||||||||
Technical Information CURE MECHANISM Sikaflex-508 cures by reaction with atmospheric moisture. At low temperatures the water content of the air is generally lower and the curing reaction proceeds somewhat slower (see diagram 1). Diagram 1: Curing speed Sikaflex-508 CHEMICAL RESISTANCE Sikaflex-508 is generally resistant to fresh water, seawater, diluted acids and diluted caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids, glycolic alcohol, concentrated mineral acids and caustic solutions or solvents. | |||||||||||||||||||||||||||||||||||||||||||||
Application Information Surface Preparation Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Application Place the unipack in the application gun and snip off the closure clip. Cut off the tip of the nozzle to suit desired joint and apply the sealant with a suitable caulking gun. Take care to avoid air entrapment in the joint. Tooling and finishing Tooling and finishing must be carried out within the skin time of the sealant. It is recommended using Sika Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior the use. Removal Uncured Sikaflex-508 can be removed from tools and equipment with Sika Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Overpainting Sikaflex-508 can be overpainted within the skin formation time. 2 component epoxy paints are usually suitable. Other paints must be tested for compatibility by carrying out preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than of elastomers what could lead to cracking of the paint film in the joint area. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.