Chat
Produse
Autentificare
0 Favorite

Parex Tecgrip V, 2-Part Polyester Resin Anchor Grout, Exterior, Dark grey, 4.415 kg

Cod produs: PTG254.00687
Share

Parex Tecgrip V, 2-Part Polyester Resin Anchor Grout, Exterior, Dark grey, 4.415 kg

Cod produs: PTG254.00687
Share
Parexlanko
Parexlanko este o marcă recunoscută în domeniul materialelor de construcții, parte a grupului Sika, specializată în soluții pentru finisaje, zidării, reparații structurale și sisteme de izolație exterioară. Produsele Parexlanko sunt dezvoltate pentru a răspunde cerințelor profesionale în lucrări de fațade, mortare de montaj și renovări durabile, fiind utilizate pe scară largă în proiecte rezidențiale, comerciale și industriale.
Citește tot

Parex Tecgrip V, 2-Part Polyester Resin Anchor Grout, Exterior, Dark grey, 4.415 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Parex Tecgrip V, 2-Part Polyester Resin Anchor Grout, Exterior, Dark grey, 4.415 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    2-COMPONENT POLYESTER RESIN ANCHOR GROUT

    Parex Tecgrip V is a two-component, polyester resin based, anchoring grout. It consists of a low viscosity polyester resin plus a catalysed filler. The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes. The mixed grout is coloured dark grey and is used for downward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter. The Product is used for the fixing of steel bolts into pre-drilled holes within concrete, rock, brickwork, stonework, masonry and other substrates capable of supporting the required load. Available in both winter and summer formulations, giving a wide range of application temperatures.  

    • Rapid setting.
    • High early strength gain.
    • Pre-batched for ease of mixing.
    • Contractor friendly packaging size.
    • Corrosion resistant.
    • Non-shrink.
    • Tested in accordance with the relevant parts of BS 6319 and BS 5080.
    • Winter and summer grades available.
    Usage
    The Product can be used with the following:        
    • Base plates.
    • Rail tracks.
    • Starter bars and dowels.
    • Safety fences and balustrades.
    • Reciprocating machinery.
    • High impact loads.
    Advantages
    • Rapid setting.
    • High early strength gain.
    • Pre-batched for ease of mixing.
    • Contractor friendly packaging size.
    • Corrosion resistant.
    • Non-shrink.
    • Tested in accordance with the relevant parts of BS 6319 and BS 5080.
    • Winter and summer grades available.
    Packaging

    4.415 kg pail (A+B)
    Colour

    Dark grey when mixed
    Technical Information
    Compressive strength

    2 hours

    ~40 N/mm²

    1 days

    ~80 N/mm²

    7 days

    ~95 N/mm²

    Modulus of elasticity in compression

    ~16 kN/mm² at 7 days

    Tensile strength

    ~17 N/mm² at 7 days
    Application Information
    Ambient air temperature

    Winter

    Minimum 5°C

    Maximum 20°C

    Summer

    Minimum 15°C

    Maximum 35°C
    Substrate temperature

    Winter

    Minimum 5°C

    Maximum 20°C

    Summer

    Minimum 15°C

    Maximum 35°C
    Setting time

    Winter grade

    Summer Grade

    ~8-12 minutes

    ~18 - 22 minutes

    (above 20°C setting will be rapid)(below 10°C setting will be extended)

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 4.415 kg (A+B)
    Usage Anchoring Base Plates, Rails, Machinery
    Usage Area Exterior
    Color Dark grey
    Chemical Base N/A
    Storage Conditions +5 °C to +30 °C - Store in original, unopened, undamaged packaging in dry conditions. Always refer to packaging.
    Density ~1800 kg/m³
    Service Temperature N/A
    Application Time N/A
    Curing Time N/A
    Application Thickness N/A
    Application Method N/A
    UV Resistant N/A
    Moisture Resistant N/A
    Mold Resistant N/A
    Paintable N/A
    Sealant N/A
    Flexible N/A
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate