Air Entraining Concrete Admixture SikaPaver® AER PC is a liquid air entraining concrete admixture which is formulated from modified naturally occurring and synthetic surfactants.
It meets the requirements of BS EN 934-2. - Provides consistent bubble size and spacing
- Improved cohesion
- Improved workability
- Improved rheology
- Reduced permeability
- Reduced bleeding
- Reduced laitance, enhancing the concrete’s resistance to frost attack
- Reduced loss of air from fresh concrete
|
Usage - SikaPaver® AER PC promotes the distribution of microscopic air bubbles throughout the cement matrix
- Applications that require high resistance to freeze/thawing cycles
- Concrete that will be exposed to tidal conditions, splash zones and de icing salts
Advantages - Provides consistent bubble size and spacing
- Improved cohesion
- Improved workability
- Improved rheology
- Reduced permeability
- Reduced bleeding
- Reduced laitance, enhancing the concrete’s resistance to frost attack
- Reduced loss of air from fresh concrete
Packaging 200 litre drum, 1000 litre IBC |
Technical Information Specific Advice Freezing Point +1°C
Effect on Setting Negligible
Effect of Overdosing Increased air content leading to reduced densities and strength
|
Application Information Compatibility Sika®Admixtures:
Compatibility information available on request
Cements:
All cement combinations
Pulverised Fuel Ash (PFA) is a waste product of modern electricity generation. Only use PFA complying with the relevant British Standard in
structural concrete. Such material will vary within the parameters laid down in the standard. Eg fineness, carbon content and loss on ignition. As a result, the amount of AER PC required may vary to maintain a specific air content Dispensing SikaPaver® AER PC should be dispensed through suitable calibrated dosing equipment. Restrictions - When using SikaPaver® AER PC a suitable mix design is required and local material sources should be evaluated.
- Due to the significant number of constituent, mix design, manufacture and placing related factors outside Sika’s control, bubble spacing determination should be carried out by the concrete producer to ensure compliance with BS – EN 934-2. Bubble spacing should be completed using the specific concrete constituents/admixture combinations. For further information see CAA Admixture information sheet AIS 16 which is available at www.admixtures.org.uk
- Support from our Technical Department is recommended
DISPENSING - The standard rules of good concreting practice, concerning production as well as placing, are to be followed. Refer to relevant standards. Fresh concrete must be cured properly.
- SikaPaver® AER PC should not be added to dry cement
- SikaPaver® AER PC should be added with the mixing water
|
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
