Chat
Produse
Autentificare
0 Favorite
  • Products
  • EVERBUILD EXACT GAP FOAM, Minimal expansion foam for precision gap filling, Interior & Exterior

EVERBUILD EXACT GAP FOAM, Minimal expansion foam for precision gap filling, Interior & Exterior, Packing: 500 mL

Cod produs: PTG039.00073
Share

EVERBUILD EXACT GAP FOAM, Minimal expansion foam for precision gap filling, Interior & Exterior, Packing: 500 mL

Cod produs: PTG039.00073
Share
EVERBUILD
Everbuild este un brand bine cunoscut din cadrul grupului Sika, specializat în produse de înaltă performanță pentru etanșare, adezivi, chituri și chimicale pentru construcții. Renumit pentru fiabilitate și durabilitate, Everbuild se adresează atât profesioniștilor, cât și pasionaților de proiecte DIY. Gama de produse include etanșanți pe bază de silicon, chituri acrilice, spume poliuretanice și diverse chimicale speciale destinate construcțiilor și renovărilor moderne, cu o prezență puternică în Regatul Unit și pe piețele internaționale.
Citește tot

EVERBUILD EXACT GAP FOAM, Minimal expansion foam for precision gap filling, Interior & Exterior

Această combinație nu există.

Cere ofertă Cere ofertă
  • Packing
Product Image
EVERBUILD EXACT GAP FOAM, Minimal expansion foam for precision gap filling, Interior & Exterior

0,00 € fără TVA 0.0 EUR

1,00 lei

Add to Cart

Minimal expansion foam for precision gap filling

EVERBUILD EXACT GAP FOAM® has been formulated to provide a more precise foam product that modestly fills voids, with a fresh foam can expanding by approx. 130 %. The controlled application significantly reduces the amount of cured excess foam that has to be cut back afterwards, the waste disposal of which can be difficult on some sites. This controlled expansion also reduces the danger of wet foam falling onto the floor and surrounding substrates. Also ideal for applications where it is important not to impact too much stress onto the item being installed.

  • Fills gaps & insulates.
  • Can be cut, sawn or plastered over after only two hours.
  • Unique safety valve – rubber free valve means it will not clog or leak.
  • Re-usability – canister may easily be re-used again.
  • Safety in transport – internal valve reduces potential of impact damage. Canister may be transported/ stored in horizontal as well as vertical position.
Usage
Filling:
  • Roof tile voids and draught points around the home.
  • Gaps around pipe entries through walls.
  • Gaps around window frames, door frames.
  • Electrical wire chasing prior to plastering.
  • Deep joints prior to applying sealant or plaster.
  • Gaps and cracks in walls and floorboards.
Insulating:
  • Behind cladding to exterior walls.
  • Behind soffit and barge boards.
 
Advantages
  • Fills gaps & insulates.
  • Can be cut, sawn or plastered over after only two hours.
  • Unique safety valve – rubber free valve means it will not clog or leak.
  • Re-usability – canister may easily be re-used again.
  • Safety in transport – internal valve reduces potential of impact damage. Canister may be transported/ stored in horizontal as well as vertical position.
    Cell Structure Medium fine Full Load Bearing Stability Approx. 12 hours (20 mm bead) Elongation At Tension 20-40 % (DIN 53530) Temp Res Of Cured Bead Long Term: -40 to +80 °C Short Term: -40 to +100 °CBuilding Material ClassB3 (DIN 4102, Part 1)
Packaging

500 ml and 750 ml cans
Technical Information
Compressive Strength

3 N/cm2 (DIN 53421) at 10 % stress

Tensile Strength

7 to 0 N/cm2 (DIN 53530)

Shear Strength

4.5 N/cm2 (DIN 53427)
Application Information
Ambient Air Temperature

+5 °C to +30 °C (Optimum +20 °C)
Cutting Time

Cuttable in 9 to 12 mins (based on 20 mm bead)
Tack Free Time

4 to 8 minutes

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Vezi Fisa Tehnica
Descarca Fisa Tehnica

Specificatii pentru EVERBUILD EXACT GAP FOAM, Minimal expansion foam for precision gap filling, Interior & Exterior

Packing 500 mL or 750 mL
General Specifications
Packaging 500 mL
Chemical Base Polyurethane
Usage Fills and insulates roof voids, pipe gaps, and wall/floor cracks
Usage Area Interior & Exterior
Color N/A
Application Method Direct from tub
Ambient Air Temperature +5 °C min. / +30 °C max
Storage Conditions Store upright between 20 and 25 °C in a pressurized container. Protect from sunlight and do not expose to temperatures above 50 °C. Do not pierce or burn the can even after use. Store as flammable liquid.Note: Elevated temperatures will reduce shelf life dramatically.
Density N/A
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

Produse Recent Vizualizate