Skip to Content
  1. All Products
  2. Parex Tecgrip V, 2-Part Polyester Resin Anchor Grout, Exterior, Dark grey, 4.415 kg
Parex Tecgrip V, 2-Part Polyester Resin Anchor Grout, Exterior, Dark grey, 4.415 kg

Parex Tecgrip V, 2-Part Polyester Resin Anchor Grout, Exterior, Dark grey, 4.415 kg

Adhesives & Sealants
PAREXLANKO

Parexlanko is a well-known brand in the construction materials sector and part of the Sika Group. It specializes in solutions for finishes, masonry, structural repairs, and external insulation systems. Parexlanko products are developed to meet the professional requirements of façade works, bonding mortars, and durable renovation projects, and are widely used in residential, commercial, and industrial applications.

Read more
https://www.polytrade.global/web/image/product.template/17627/image_1920?unique=ab4a244
You have already submitted a query for this product today.

This combination does not exist.

Contact Us
Preview TDS
Download TDS
General Specifications
Packaging 4.415 kg (A+B)
Usage Anchoring Base Plates, Rails, Machinery
Usage Area Exterior
Color Dark grey
Chemical Base N/A
Storage Conditions +5 °C to +30 °C - Store in original, unopened, undamaged packaging in dry conditions. Always refer to packaging.
Density ~1800 kg/m³
Service Temperature N/A
Application Time N/A
Curing Time N/A
Application Thickness N/A
Application Method N/A
UV Resistant N/A
Moisture Resistant N/A
Mold Resistant N/A
Paintable N/A
Sealant N/A
Flexible N/A

2-COMPONENT POLYESTER RESIN ANCHOR GROUT

Parex Tecgrip V is a two-component, polyester resin based, anchoring grout. It consists of a low viscosity polyester resin plus a catalysed filler. The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes. The mixed grout is coloured dark grey and is used for downward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter. The Product is used for the fixing of steel bolts into pre-drilled holes within concrete, rock, brickwork, stonework, masonry and other substrates capable of supporting the required load. Available in both winter and summer formulations, giving a wide range of application temperatures.  

  • Rapid setting.
  • High early strength gain.
  • Pre-batched for ease of mixing.
  • Contractor friendly packaging size.
  • Corrosion resistant.
  • Non-shrink.
  • Tested in accordance with the relevant parts of BS 6319 and BS 5080.
  • Winter and summer grades available.
Usage
The Product can be used with the following:        
  • Base plates.
  • Rail tracks.
  • Starter bars and dowels.
  • Safety fences and balustrades.
  • Reciprocating machinery.
  • High impact loads.
Advantages
  • Rapid setting.
  • High early strength gain.
  • Pre-batched for ease of mixing.
  • Contractor friendly packaging size.
  • Corrosion resistant.
  • Non-shrink.
  • Tested in accordance with the relevant parts of BS 6319 and BS 5080.
  • Winter and summer grades available.
Packaging

4.415 kg pail (A+B)
Colour

Dark grey when mixed
Technical Information
Compressive strength

2 hours

~40 N/mm²

1 days

~80 N/mm²

7 days

~95 N/mm²

Modulus of elasticity in compression

~16 kN/mm² at 7 days

Tensile strength

~17 N/mm² at 7 days
Application Information
Ambient air temperature

Winter

Minimum 5°C

Maximum 20°C

Summer

Minimum 15°C

Maximum 35°C
Substrate temperature

Winter

Minimum 5°C

Maximum 20°C

Summer

Minimum 15°C

Maximum 35°C
Setting time

Winter grade

Summer Grade

~8-12 minutes

~18 - 22 minutes

(above 20°C setting will be rapid)(below 10°C setting will be extended)