Skip to Content
  1. All Products
  2. SikaMur InjectoCream-100, Water-repellent Cream for Rising Damp Control, Interior/exterior, White
SikaMur InjectoCream-100, Water-repellent Cream for Rising Damp Control, Interior/exterior, White

SikaMur InjectoCream-100, Water-repellent Cream for Rising Damp Control, Interior/exterior, White

Waterproofing
SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Read more
https://www.polytrade.global/web/image/product.template/18395/image_1920?unique=b734672
You have already submitted a query for this product today.
  • Packing

This combination does not exist.

Contact Us
Preview TDS
Download TDS
General Specifications
Packaging 600 mL
Width 2000.0 mm
Length m
Weight Kg
Usage SikaMur InjectoCream-100 can be used to treat rising damp in almost all types of masonry walls:Solid brick walls.Cavity walls.Random form stone and rubble infill walls, etc
Chemical Base Polyurethane (PU) resin with blowing agent, semi-fluid base
Usage Area Interior/Exterior
Color White
Storage Conditions Dry storage at temperatures from +5 °C up to +35 °C. Protect from direct sunlight and humidity
Density ~0,90 kg/L   (20 °C)
Consumption Variable site conditions can obviously cause variations in consumption. Always allow at least an extra 10 % when estimating the quantity of material required.

SikaMur® InjectoCream-100 is a new concept for the control of rising damp. SikaMur® InjectoCream-100 is a water repellent cream, packed in a 600 ml sausage or 300 ml cartridge. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun - no special injection pump required. Once injected into the mortar course, SikaMur® InjectoCream-100 will diffuse within the damp wall to form a Damp Proof Course (DPC), will allow the wall to dry and block future rising damp.
SikaMur® InjectoCream-100 complies with the requirements of WTA Guideline 4-4-04/D “Injection of masonry in order to avoid capillary moisture content”.

  • Easy to install (low risk for operative error, not so dependent on operative skills).
  • 1-component, ready to use.
  • Fast to install (no ‘double drilling’, no waiting for liquid to penetrate under pressure or gravity).
Usage
SikaMur® InjectoCream-100 can be used to treat rising damp in almost all types of masonry walls:
  • Solid brick walls.
  • Cavity walls.
  • Random form stone and rubble infill walls, etc.
Advantages
  • Easy to install (low risk for operative error, not so dependent on operative skills).
  • 1-component, ready to use.
  • Fast to install (no ‘double drilling’, no waiting for liquid to penetrate under pressure or gravity).
 
  • No need for preliminary watertight sealing around the injection holes (as with pressure systems).
  • Fast to inject (no waiting times required to pump in the material compared to pressure injection systems and no refilling as with gravity fed injection systems).
  • Consistent application rate (easy to calculate the amount of material that will be required).
  • Does not require a special expensive pump.
  • Spillage & mess virtually eliminated from the site (no problem with fluids flooding through party walls, cavities or service ducts).
  • Concentrated formula with approx. 80 % active ingredients (introduces a lower quantity of inactive carrier into the wall - much more effective results compared to less concentrated materials).
  • Low hazard, water based - non-caustic, non-flammable - not injected under pressure.
  • Very low wastage
  • Small waste disposal
  • No risk of increased efflorescence (as with siliconate rising damp treatments).
Packaging

600 ml sausage (Boxes of 10 sausages)
300 ml cartridge (Boxes of 12 cartridges)
Colour

White
Application Information
Ambient Air Temperature

+5 °C min. / +35 °C max.
 
Injection works shall be carried out when the temperature does not drop below 0 °C for at least 48 hours after application to allow the material to diffuse optimally.