Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sikafloor-440 Level Fibre Reinforced, Heat-resistant, fibre-reinforced leveller, Interior & Exterior, Fine Grey, 20 kg

Sikafloor-440 Level Fibre Reinforced, Heat-resistant, fibre-reinforced leveller, Interior & Exterior, Fine Grey, 20 kg

Cod produs: PTG041.00006
Share

Sikafloor-440 Level Fibre Reinforced, Heat-resistant, fibre-reinforced leveller, Interior & Exterior, Fine Grey, 20 kg

Cod produs: PTG041.00006
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sikafloor-440 Level Fibre Reinforced, Heat-resistant, fibre-reinforced leveller, Interior & Exterior, Fine Grey, 20 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sikafloor-440 Level Fibre Reinforced, Heat-resistant, fibre-reinforced leveller, Interior & Exterior, Fine Grey, 20 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Heat-resistant, fibre reinforced self levelling compound

    Sikafloor®-440 Level Fibre Reinforced is a fibre and polymer reinforced, flexible, high strength cement based levelling compound, designed specifically for use with underfloor heating and for application over wooden floors. Once mixed with water, Sikafloor®-440 Level Fibre Reinforced produces a smooth self-levelling compound which dries to a tough flexible finish which may then be overlaid with most common floor coverings or left as a final wearing surface. 

    • Rapid setting and may be walked on in 3 hours
    • Can be overlaid with ceramic tiles after only                4-5 hours at normal temperatures.
    • Strong enough to accept light vehicular traffic
    • Can be overlaid with a suitable covering or used as a final wearing surface
    • Designed for the embedment of underfloor heating elements
    Usage
    • Embedment of underfloor heating
    • As a final wearing surface
    • Suitable for levelling/smoothing uneven floors
    • Suitable for covering existing concrete, sand/cement screeds, brick, stone, unglazed ceramic tiles, plastic sheet DPC, epoxy membranes and wooden floors
    • Internal and external use
     
    Advantages
    • Rapid setting and may be walked on in 3 hours
    • Can be overlaid with ceramic tiles after only                4-5 hours at normal temperatures. 
    • Strong enough to accept light vehicular traffic
    • Can be overlaid with a suitable covering or used as a final wearing surface
    • Designed for the embedment of underfloor heating elements
    Packaging

    20 kg Sack
    Colour

    Fine grey powder
    Technical Information
    Abrasion Resistance

    BCA Wear Resistance Class AR 0.5

    Compressive Strength

    25 N/mm2

    Flexural Strength

    5 N/mm2

     

    Application Information
    Mixing Ratio

    20 kg of Sikafloor®-440 Level Fibre Reinforced mixed with 4.4 litres of clean water
    Layer Thickness

    2 mm - 30 mm
    Ambient Air Temperature

    4 °C to 35 °C
    Pot Life

    20 minutes at 20 °C
    Waiting Time / Overcoating

    Will accept foot traffic in approximately 3 hours at 20 °C.

    Can accept floor coverings in approximately 4-5 hours.

    These setting times will be significantly extended at lower temperatures over low porosity subfloors.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 20 kg
    Chemical Base Cement and aggregate based
    Usage Used for embedding underfloor heating, as a final surface, or for levelling various substrates
    Usage Area Interior & Exterior
    Color Fine Grey
    Working Time 20 minutes
    Application Thickness 2 mm >< 30 mm
    Ambient Air Temperature 4 °C to 35 °C
    Storage Conditions This product must be stored in unopened bags clear of the ground in cool dry conditions. The use of this product after the end of declared storage period may increase the risk of an allergic reaction.
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate