Chat
Produse
Autentificare
0 Favorite

Sika MonoTop-3200 Grid, Concrete repair mortar for use with CarboDur® Grid system, Interior & Exterior, Grey Powder, 25 kg

Cod produs: PTG042.00008
Share

Sika MonoTop-3200 Grid, Concrete repair mortar for use with CarboDur® Grid system, Interior & Exterior, Grey Powder, 25 kg

Cod produs: PTG042.00008
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika MonoTop-3200 Grid, Concrete repair mortar for use with CarboDur® Grid system, Interior & Exterior, Grey Powder, 25 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika MonoTop-3200 Grid, Concrete repair mortar for use with CarboDur® Grid system, Interior & Exterior, Grey Powder, 25 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Cementitious R3 Concrete Repair Mortar for the Sika CarboDur Grid System

    Sika MonoTop-3200 Grid is a one-part, cementitious, low shrinkage, surfacing or finishing mortar. It is designed to be used in combination with the Sika CarboDur-300 Grid as part of the Sika CarboDur Grid System which provides an efficient strengthening system for concrete structures.

    • Good surface finishing.
    • Applied up to 5 mm thick in one layer on vertical and horizontal applications.
    • Non-sag overhead at maximum thickness.
    • Good workability.
    • Hand and machine application (wet spray technique).
    • Ready to mix with water.
    • Does not contain chlorides or other corrosion promoting additives.
    • Sulphate resistant.
    Usage
    A Component from the Sika CarboDur Grid system designed for:
    • Reinforcing and strengthening concrete civil engineering structures, residential and commercial buildings.
    • Restoring the load capacity of structural concrete elements and limit the crack size.
    • Producing a thin layer render.
    • Repairing minor concrete defects (pores and honeycombed concrete).
    Please note: The Product may only be used by experienced professionals.  
    Advantages
    • Good surface finishing.
    • Applied up to 5 mm thick in one layer on vertical and horizontal applications.
    • Non-sag overhead at maximum thickness.
    • Good workability.
    • Hand and machine application (wet spray technique).
    • Ready to mix with water.
    • Does not contain chlorides or other corrosion promoting additives.
    • Sulphate resistant.
    Packaging

    25 kg bag.
    Colour

    Grey powder.
    Technical Information
    Compressive Strength

    ~30 MPa after 28 days at +20 °C

    (EN 12190)

    Modulus of Elasticity in Compression

    ~15 GPa

    (EN 13412)

    Flexural Strength

    ~7,5 MPa after 28 days at +20 °C

    (EN 12190)

    Tensile adhesion strength

    ≥ 2,0 MPa

    (EN 1542)
    Application Information
    Mixing Ratio

    4 litres of water for 25 kg bag
    Fresh mortar density

    ~1,8 kg/l
    Layer Thickness

    Application

    Minimum

    Maximum

    Horizontal

    1 mm

    5 mm

    Vertical

    1 mm

    5 mm

    Overhead

    1 mm

    5 mm
    Product Temperature

    Maximum

    +30 °C

    Minimum

    +5 °C
    Ambient Air Temperature

    Maximum

    +35 °C

    Minimum

    +5 °C
    Substrate Temperature

    Maximum

    +35 °C

    Minimum

    +5 °C
    Pot Life

    ~40 minutes at +20 °C

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 25 kg
    Usage Structural reinforcement and minor concrete repair
    Usage Area Interior & Exterior
    Color Grey powder
    Chemical Base Cement, selected aggregates, additives and polymers.
    Storage Conditions +5 °C to +35 °C - Store in original, unopened, undamaged packaging in dry conditions. Always refer to packaging
    Density 1,8 kg/L
    Application Thickness 1 mm >< 5 mm
    Ambient Air Temperature +5°C >< +35°C
    Substrate Temperature +5°C >< +35°C
    Working time 40 minutes
    Waiting Time N/A
    Consumption 1.6 kg/m²/mm
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate