Chat
Produse
Autentificare
0 Favorite

Sika MonoTop-614 F, Flowable repair mortar for concrete damage, Interior & Exterior, Grey Powder, 25 kg

Cod produs: PTG042.00027
Share

Sika MonoTop-614 F, Flowable repair mortar for concrete damage, Interior & Exterior, Grey Powder, 25 kg

Cod produs: PTG042.00027
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika MonoTop-614 F, Flowable repair mortar for concrete damage, Interior & Exterior, Grey Powder, 25 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika MonoTop-614 F, Flowable repair mortar for concrete damage, Interior & Exterior, Grey Powder, 25 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    R4 Flowable Cementitious Repair Mortar

    Sika MonoTop -614F is a cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3.

    • One component, ready to use
    • Low shrinkage
    • High mechanical properties
    • Good flow properties
    • Repair depths upto 150 mm in one application
    • Can be poured or pumped
    • Overcoatable with Sika reprofiling/levelling mortars and coatings
    • Reduced dust during mixing
    Usage
    • Horizontal or vertical repairs
    • Bridges
    • Marine structures
    • Tunnels
    • Buildings
    • Fire damaged structures
    • For exterior and interior use
    • In place of R1, R2 & R3 mortars
     
    Advantages
    • One component, ready to use
    • Low shrinkage
    • High mechanical properties
    • Good flow properties
    • Repair depths upto 150 mm in one application
    • Can be poured or pumped
    • Overcoatable with Sika reprofiling/levelling mortars and coatings
    • Reduced dust during mixing
    Packaging

    25kg bag
    Colour

    Grey powder
    Technical Information
    Compressive Strength

    1 day (5°C)

    ~2MPa

    1 day (20°C)

    ~25MPa

    3 days (5°C)

    ~30MPa

    3 days (20°C)

    ~55MPa

    7 days (5°C)

    ~50MPa

    		7 days (20°C)

    ~70MPa

    14 days (5°C)~65MPa14 days (20°C)~80MPa

    Modulus of Elasticity in Compression

    ~41GPa

    Flexural Strength

    ~8MPa at 28 days

    Tensile Adhesion Strength

    ~3MPa*

    *No primer

    Coefficient of Thermal Expansion

    ~ 14 x 10-6 m/m °C

    (BS EN 1770)

    Reaction to Fire

    Class A1

    Capillary Absorption

    ~ 0.3 kg.m-2.h-0.5

    Carbonation Resistance

    dk ≤ control concrete

    Electrical Resistivity

    ~39 (kohm.cm)

    (Wenner Test at 28 days)
    Application Information
    Mixing Ratio

    Water : mortar powder = 0.093 parts by weight. (2.30 – 2.40litres of water per bag)
    Layer Thickness

    15 mm min. / 150 mm max.
    Consistency

    Flow Properties

    Temperature

    Time (mins)

    Flow in 30 Secs

    5oC

    0

    ~690mm

    5oC

    20

    ~690mm

    20oC0~970mm
    20oC20~970mm
    Ambient Air Temperature

    +5°C min. / +30°C max.
    Substrate Temperature

    +5°C min. / +30°C max.
    Initial Set Time

    ~4-5 hours

    (BS EN 13294)
    Final Set Time

    ~7-8 hours

    (BS EN 13294)

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 25 kg
    Usage Horizontal or vertical repairs for bridges, marine structures, tunnels, buildings, fire damaged structures
    Usage Area Interior & Exterior
    Color Grey powder
    Chemical Base Portland cement type Cem I, selected aggregates and additives.
    Storage Conditions Store properly in original unopened, sealed and undamaged packaging in dry and cool conditions
    Density 2300 – 2400 Kg/m³
    Application Thickness 15 mm >< 150 mm
    Ambient Air Temperature +5°C >< +30°C
    Substrate Temperature +5°C >< +30°C
    Working time 4 - 5 hours
    Waiting Time 7-8 hours
    Consumption N/A
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate