Chat
Produse
Autentificare
0 Favorite

EVERBUILD EpoxySET 105 Standard Cure, 3-part general repair mortar, Interior & Exterior, Grey, Packing: 4 kg

Cod produs: PTG042.00039
Share

EVERBUILD EpoxySET 105 Standard Cure, 3-part general repair mortar, Interior & Exterior, Grey, Packing: 4 kg

Cod produs: PTG042.00039
Share
EVERBUILD
Everbuild este un brand bine cunoscut din cadrul grupului Sika, specializat în produse de înaltă performanță pentru etanșare, adezivi, chituri și chimicale pentru construcții. Renumit pentru fiabilitate și durabilitate, Everbuild se adresează atât profesioniștilor, cât și pasionaților de proiecte DIY. Gama de produse include etanșanți pe bază de silicon, chituri acrilice, spume poliuretanice și diverse chimicale speciale destinate construcțiilor și renovărilor moderne, cu o prezență puternică în Regatul Unit și pe piețele internaționale.
Citește tot

EVERBUILD EpoxySET 105 Standard Cure, 3-part general repair mortar, Interior & Exterior, Grey

Această combinație nu există.

Cere ofertă Cere ofertă
  • Packing
Product Image
EVERBUILD EpoxySET 105 Standard Cure, 3-part general repair mortar, Interior & Exterior, Grey

0,00 € fără TVA 0.0 EUR

1,00 lei

Add to Cart

A three-part general purpose repair mortar.

EVERBUILD EpoxySET 105 Standard Cure is a three-part general purpose repair mortar based on epoxy resin technology. EVERBUILD EpoxySET 105 Standard Cure is formulated to withstand chemicals, impact and abrasion and can be used to repair concrete, screeds, stone, brick and steel in even the most demanding domestic and industrial situations. EVERBUILD EpoxySET 105 Standard Cure is the ideal product for repairing floors, steps, pipes, kerbs and sills. EVERBUILD EpoxySET 105 Standard Cure is also the ideal choice for repairing cracks in masonry and concrete.

  • Excellent chemical resistance.
  • Excellent impact and wear resistance.
  • Can be laid in thin sections.
  • Greater physical strength than conventional cementitious systems.
  • Easy to mix.
Usage
For repairing:
  • Heavy traffic areas.
  • Steps.
  • Walkways/Ramps.
  • Industrial floors.
 
Advantages
  • Excellent chemical resistance.
  • Excellent impact and wear resistance.
  • Can be laid in thin sections.
  • Greater physical strength than conventional cementitious systems.
  • Easy to mix.
Application / Curing tempreature +4 to +40 °C
Packaging

4 kg and 14 kg Plastic tub.
Colour

Grey
Technical Information
Abrasion Resistance

High

Compressive Strength

50 N/mm2 at 24 hours (20 °C)

58 N/mm2 at 28 days (EN 12910)

Modulus of Elasticity in Compression

65.5 N/mm2 (EN 134512)

Tensile Strength

15 N/mm2 @ 7 days (20 °C)

Tensile adhesion strength

2.2 MPa (EN 1542)

Service Temperature

-20 to +50 °C

Thermal Compatibility

3.3 MPa under dry cycling (EN13687-4)
Application Information
Pot Life

The pot life of this product is 20-25 minutes at 20 °C. Low temperatures will retard the cure. Do not apply below 4 °C.
Curing Time

Initial: 24 hours. Final: 7 days. Do not traffic for 24 hours.

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Vezi Fisa Tehnica
Descarca Fisa Tehnica

Specificatii pentru EVERBUILD EpoxySET 105 Standard Cure, 3-part general repair mortar, Interior & Exterior, Grey

Packing 4 kg or 14 kg
General Specifications
Packaging 4 kg
Usage Repairing heavy traffic areas, steps, walkways, industrial floors
Usage Area Interior & Exterior
Color Grey
Chemical Base N/A
Storage Conditions +5 °C to +25 °C - Store in original, unopened, undamaged packaging in dry conditions. Always refer to packaging
Density 2.03 g/cm³
Application Thickness 3 mm
Ambient Air Temperature -20°C >< +50°C
Substrate Temperature -20°C >< +50°C
Working time 20 - 25 minutes
Waiting Time 24 hours
Consumption 2.1 m² / 3 mm
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

Produse Recent Vizualizate