Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Injection-201 CE, Low-viscosity Elastic Solvent-free Polyurethane Injection Resin, Exterior

Sika Injection-201 CE, Low-viscosity Elastic Solvent-free Polyurethane Injection Resin, Exterior

Cod produs: PTG255.00017
Share

Sika Injection-201 CE, Low-viscosity Elastic Solvent-free Polyurethane Injection Resin, Exterior

Cod produs: PTG255.00017
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Injection-201 CE, Low-viscosity Elastic Solvent-free Polyurethane Injection Resin, Exterior

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika Injection-201 CE, Low-viscosity Elastic Solvent-free Polyurethane Injection Resin, Exterior

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Sika® Injection-201 CE is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible.

    • Permanently elastic, can absorb limited movements
    • No shrinkage in subsequent dry conditions
    • Due to its low viscosity it can penetrate into cracks >0.2 mm in width
    • Cured Sika® Injection-201 CE is inert and chemically-resistant
    • Solvent-free
    • In cold temperatures (< +10°C) Sika® Injection-201 CE can be accelerated using Sika® Injection-AC20
    • Can be injected as a one component system
    Usage
    • Sika® Injection-201 CE is used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in concrete, brickwork and natural stone
    • Sika® Injection-201 CE can be used for the injection of the SikaFuko®-System (non re-injectable!)
    • For use in water-bearing cracks under hydrostatic pressure, preliminary injection shall be made with Sika® Injection-101 RC
     
    Advantages
    • Permanently elastic, can absorb limited movements
    • No shrinkage in subsequent dry conditions
    • Due to its low viscosity it can penetrate into cracks >0.2 mm in width
    • Cured Sika® Injection-201 CE is inert and chemically-resistant
    • Solvent-free
    • In cold temperatures (< +10°C) Sika® Injection-201 CE can be accelerated using Sika® Injection-AC20
    • Can be injected as a one component system
    Packaging

    Part A10 kg, 20 kg

    Part B

    10.6 kg, 21.2 kg
    Colour

    Part Acolourless

    Part B

    brown
    Technical Information
    Shore A Hardness

    ~43 (7 days)

    (EN 868)

    Flexural E-Modulus

    ~2 MPa(ISO 527-1)
    Application Information
    Mixing Ratio

    Part A:Part B 1:1 parts by volume

    Reaction time table Sika® Injection-201 CE
    (ISO 9514)

    		Material Temperature
    Dosage*+5 °C+10 °C

    +20 °C

    0.0 %

    ~180 min

    		~180 min~135 min

    0.5 %

    ~60 min

    		~55 min~38 min

    1.0 %

    ~29 min

    		~32 min~24 min
    2.0 %~16 min~17 min~13 min
    3.0 %~13 min~14 min~10 min
    5.0 %~9 min~7 min~5 min

    *Dosage of Sika® Injection-AC20 in % by weight of Sika® Injection-201 Comp. A
      

    The given data are laboratory parameters and may deviate depending on the object and conditions on site.
    Ambient Air Temperature

    +5°C min. / +35°C max.
    Substrate Temperature

    +5°C min. / +35°C max.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging Part A: 10 kg, 20 kg; Part B: 10.6 kg, 21.2 kg
    Width 2000.0 mm
    Length m
    Weight Kg
    Usage Sika Injection-201 CE is used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in concrete, brickwork and natural stoneSika Injection-201 CE can be used for the injection of the SikaFuko-System (non re-injectable!)For use in water-bearing cracks under hydrostatic pressure, preliminary injection shall be made with Sika Injection-101 RC
    Chemical Base Solvent-free, water-reactive polyurethane (PUR) resin, 2-component
    Usage Area Exterior
    Color Part A (Resin): Colourless; Part B (Hardener): Brown
    Storage Conditions Dry storage at temperatures between +5 °C and +35 °C. Protect from direct sunlight and humidity
    Density Part A: ~1.00 kg/l; Part B: ~1.07 kg/l
    Consumption N/A
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate