| SikaMur® InjectoCream-100 is a new concept for the control of rising damp. SikaMur® InjectoCream-100 is a water repellent cream, packed in a 600 ml sausage or 300 ml cartridge. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun - no special injection pump required. Once injected into the mortar course, SikaMur® InjectoCream-100 will diffuse within the damp wall to form a Damp Proof Course (DPC), will allow the wall to dry and block future rising damp.
SikaMur® InjectoCream-100 complies with the requirements of WTA Guideline 4-4-04/D “Injection of masonry in order to avoid capillary moisture content”. - Easy to install (low risk for operative error, not so dependent on operative skills).
- 1-component, ready to use.
- Fast to install (no ‘double drilling’, no waiting for liquid to penetrate under pressure or gravity).
|
Usage SikaMur® InjectoCream-100 can be used to treat rising damp in almost all types of masonry walls: - Solid brick walls.
- Cavity walls.
- Random form stone and rubble infill walls, etc.
Advantages - Easy to install (low risk for operative error, not so dependent on operative skills).
- 1-component, ready to use.
- Fast to install (no ‘double drilling’, no waiting for liquid to penetrate under pressure or gravity).
- No need for preliminary watertight sealing around the injection holes (as with pressure systems).
- Fast to inject (no waiting times required to pump in the material compared to pressure injection systems and no refilling as with gravity fed injection systems).
- Consistent application rate (easy to calculate the amount of material that will be required).
- Does not require a special expensive pump.
- Spillage & mess virtually eliminated from the site (no problem with fluids flooding through party walls, cavities or service ducts).
- Concentrated formula with approx. 80 % active ingredients (introduces a lower quantity of inactive carrier into the wall - much more effective results compared to less concentrated materials).
- Low hazard, water based - non-caustic, non-flammable - not injected under pressure.
- Very low wastage
- Small waste disposal
- No risk of increased efflorescence (as with siliconate rising damp treatments).
Packaging 600 ml sausage (Boxes of 10 sausages)
300 ml cartridge (Boxes of 12 cartridges) |
Application Information Ambient Air Temperature +5 °C min. / +35 °C max.
Injection works shall be carried out when the temperature does not drop below 0 °C for at least 48 hours after application to allow the material to diffuse optimally. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
