Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot
Sika Remover-208, Solvent Cleaner for Heavily Contaminated Surfaces, Interior, Clear, 1000 mL
Solvent-based cleaning agent for strongly contaminated non-porous surfaces
Sika® Remover-208 is a solvent-based colourless clear cleaning agent for painted substrates. It is also used to remove traces of Sikaflex® products.
Removes heavy contaminants
Suitable for most painted surfaces and plastics
Available in aerosol can
Primer Product Benefits
Removes heavy contaminants
Suitable for most painted surfaces and plastics
Available in aerosol can
Usage
Sika® Remover-208 is used to pre-clean strongly contaminated non-porous substrates. Sika® Remover-208 can be used to clean painted surfaces prior to bonding.
Sika® Remover-208 can also be used to remove uncured excess of Sikaflex® adhesive or sealant from application tools or soiled surfaces.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Advantages
Removes heavy contaminants
Suitable for most painted surfaces and plastics
Available in aerosol can
Packaging
Can
1000 ml
Typical Product Data
Chemical base
Solvent-based
Colour (CQP001-1)
Colourless, clear
Application temperature
5 ─ 40 °C
Application method
Wipe-on, wipe-off with lint-free paper towel
Shelf life
24 months A
CQP = Corporate Quality Procedure
A)stored in sealed container in up-right position in a dry place at ≤ 25 °C
Technical Information
IMPORTANT NOTE
Compatibility with the actual substrate is to be verified prior the application.
Discard any Sika® Remover-208 thats lost its clear appearance (contaminated).
Application Information
Removal of uncured material
Remove the bulk of the Sikaflex® residue with a knife or spatula. Moisten a rag or towel with Sika® Remover-208 and wipe off the remaining adhesive or sealant.
Surface Cleaning
Wipe painted surfaces with a moistened rag or towel with Sika® Remover-208. Wet the paper towel with solvent by pouring the liquid onto the cloth. Never dip the paper towel into the Sika® Remover-208 as it may contaminate it! Wipe the surface with the wetted paper towel. Use fresh paper towels regularly in order to retain the cleansing power.
Before the solvent dries on the surface (evaporates), wipe it off with a clean, dry, lint-free paper towel.
Repeat the last two steps until no contaminants show up on a white paper towel.
Do not use on sensitive surfaces such as fresh paints.
Tightly reseal container immediately after each use.
Pre-cleaner for heavily contaminated, non-porous surfaces and uncured Sikaflex; for professional
Usage Area
Interior
Color
Clear
Appearance
Liquid solution (solvent-based)
Storage Conditions
N/A
Density
~0.79 g/cm³
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator.
Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.