Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sikafloor-330, Elastic Polyurethane Self-Smoothing Resin for Floor Waterproofing, Interior, 20 Kg

Sikafloor-330, Elastic Polyurethane Self-Smoothing Resin for Floor Waterproofing, Interior, 20 Kg, Color: RAL 7042

Cod produs: PTG259.00007
Share

Sikafloor-330, Elastic Polyurethane Self-Smoothing Resin for Floor Waterproofing, Interior, 20 Kg, Color: RAL 7042

Cod produs: PTG259.00007
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sikafloor-330, Elastic Polyurethane Self-Smoothing Resin for Floor Waterproofing, Interior, 20 Kg

Această combinație nu există.

Cere ofertă Cere ofertă
  • Color
Product Image
Sikafloor-330, Elastic Polyurethane Self-Smoothing Resin for Floor Waterproofing, Interior, 20 Kg

0,00 € fără TVA 0.0 EUR

1,00 lei

Add to Cart

Polyurethane elastic low VOC self-smoothing flooring resin

Sikafloor-330 is a 2-part, polyurethane, elastic, low VOC self-smoothing flooring resin. It is part of the Sika Comfortfloor decorative flooring range.

  • Very low VOC emissions
  • Soft underfoot
  • Comfortable
  • Reduces impact noise transmission and airborne noise
  • Seamless
  • Permanently elastic
  • Good mechanical resistance
  • Easy to apply
  • Low maintenance finish
Usage
Decorative elastic smooth resin flooring wearing layer for:
  • Sika ComfortFloor and Sika ComfortFloor Pro Systems
  • Hospitals
  • Schools
  • Retail areas
  • Showrooms
  • Entrance halls
  • Lobbies
  • Open-plan offices
  • Museums
  • Residential use
  • Interior use only
Advantages
  • Very low VOC emissions
  • Soft underfoot
  • Comfortable
  • Reduces impact noise transmission and airborne noise
  • Seamless
  • Permanently elastic
  • Good mechanical resistance
  • Easy to apply
  • Low maintenance finish  
Packaging

Part A

15.8 kg container

Part B

4.2 kg container

Part A+B

20 kg ready to mix unit

Refer to current price list for packaging variations
Colour

Final floor appearance: Smooth matt finish

Part  A - resin

liquid / coloured

Part B - hardener

liquid / light brown, transparent

Available in RAL 1014, RAL 2000, RAL 3009, RAL 5015, RAL 6010, RAL 7042, RAL 8002, RAL 9001, RAL 9005

The colour of the Sikafloor-330 has to be approximately adjusted to the colour of the Sikafloor-305 W seal / top coat.

Applied colours selected from colour charts will be approximate.

For colour matching: Apply colour sample and confirm selected colour under real lighting conditions.

When product is exposed to direct sunlight, there may be some discolouration and colour variation, this has no influence on the function and performance of the floor finish.
Technical Information
Shore A Hardness

~80 (14 days / +23 °C)

(DIN 53505)

Tensile Strength

> 8.0 N/mm² (14 days / +23 °C)

(DIN 53504)

Tensile adhesion strength

> 1.5 N/mm2 (failure in concrete)

(EN 13892-8)

Tear Strength

~25 N/mm (14 days / +23 °C)

(ISO 34-1)

Chemical Resistance

Sikafloor-330 must always be sealed with Sikafloor-305 W and provides the chemical resistance. Refer to Product Data Sheet.
Application Information
Mixing Ratio

Part A : Part B = 79 : 21 (by weight)
Layer Thickness

 ~2.0 mm at 2.8 kg/m²

Refer to the System Data Sheets: Sika Comfortfloor PS-23, Sika Comfortfloor PS-63, Sika Comfortfloor PS-65
Product Temperature

+15 °C min. / +30 °C max.
Ambient Air Temperature

+15 °C min. / +30 °C max.
Relative Air Humidity

80 % max.
Dew Point

Beware of condensation.
The substrate and uncured applied floor material must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature

+15 °C min. / +30 °C max.
Substrate Moisture Content

≤4 % parts by weight

The following test methods can be used: Sika-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Pot Life

Temperature

Time

+10 °C

~21 minutes

+20 °C

~15 minutes

+30 °C~12 minutes
Curing Time

Before overcoating Sikafloor-330 allow:

Substrate temperature

Minimum

Maximum

+10 °C

24 hours

72 hours

+20 °C

16 hours

48 hours

+30 °C

16 hours

36 hours

Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Applied Product Ready for Use

Temperature

Foot traffic

Full cure

+10 °C

~24 hours

~9 days

+20 °C

~18 hours

~7 days

+30 °C

~16 hours

~5 days

Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Vezi Fisa Tehnica
Descarca Fisa Tehnica

Specificatii pentru Sikafloor-330, Elastic Polyurethane Self-Smoothing Resin for Floor Waterproofing, Interior, 20 Kg

Color RAL 7042 or RAL 1014 or RAL 2000 or RAL 3009 or RAL 8002 or RAL 9001 or RAL 9005 or RAL 5015 or RAL 6010
General Specifications
Packaging Part A: 15.8 kg; Part B: 4.2 kg; Part A + B: 20 kg ready to mix unit
Chemical Base Polyurethane
Usage Decorative elastic flooring for hospitals, schools, offices, and residential use
Application Method Notched trowel + spiked roller
Usage Area Interior
Color RAL 1014
Ambient Air Temperature +15 °C min. / +30 °C max.
Storage Conditions The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
Curing Time N/A
Working Time +10 °C ~21 minutes; +20 °C ~15 minutes; +30 °C ~12 minutes
Density Resin mixed: 1.40 kg/L
Consumption 1.4 kg/m²/mm
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

Produse Recent Vizualizate