Sikacor Eg-1, High-Solids Epoxy Intermediate Coat for Floor Systems, Exterior

Category: Rășini

SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Color
- Grey Metallic - DB 701
- Grey Metallic - DB 702
- Grey Metallic - DB 703
- Green Metallic - DB 601
- White
Packing
- 15 kg
- 3 kg

Această combinație nu există.

High-solid epoxy-based intermediate coat

SikaCor EG-1 is a 2-pack intermediate coat based on epoxy resin containing micaceous iron oxide. Low solvent content according to Protective Coatings Directive of German Paint Industry Association
(VdL-RL 04).

Excellent adhesion to hot dip galvanized steel, zinc spraying, stainless steel and aluminium
High film thickness per coat (up to 120 μm)
Very good corrosion protection
Tough elastic and hard but not brittle
Largely insensitive against shock and impact

Usage

Designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospheric conditions, hot-dip galvanized steel, zinc spraying, stainless steel and aluminium.In combination with 2-pack primer and top coats, SikaCor EG-1 is a mechanically water and
chemically resistant coating system for durable corrosion protection, corrosivity category C5 high according to ISO 12944-2.

Advantages

Excellent adhesion to hot dip galvanized steel, zinc spraying, stainless steel and aluminium
High film thickness per coat (up to 120 μm)
Very good corrosion protection
Tough elastic and hard but not brittle
Largely insensitive against shock and impact

Packaging

SikaCor EG-1	15 kg and 3 kg net.
Sika Thinner EG	10 l and 3 l
SikaCor Cleaner	25 l

Colour

Grey metallic approx. DB 701

Grey metallic approx. DB 702, mat.-no. 687.12

Grey metallic approx. DB 703, mat.-no. 687.13

Green metallic approx. DB 601, mat.-no. 687.14

White

Slight colour deviations are possible due to raw material characteristics.

Technical Information

Chemical Resistance

Weather, water, sewage, seawater, smoke, de-icing salts, acid and lye vapours, oils, grease and short term exposure to fuels and solvents.

Thermal Resistance

Dry heat up to + 150 °C, short term up to + 180 °C
Damp heat up to approx. + 50 °C
In case of higher temperatures please consult Sika.

Application Information

Mixing Ratio

Components A : B

By weight	90 : 10
By volume	4.7 : 1

Thinner

Sika Thinner EG
If necessary max. 5 % Sika Thinner EG may be added to adapt the viscosity.

Product Temperature

Min. + 5 °C

Relative Air Humidity

Max. 85 %, except the surface temperature is significantly higher than the dew point temperature, it shall be at least 3 K above dew point.

Surface Temperature

Min. + 5 °C

Pot Life

At + 10 °C	~12 h
At + 20 °C	~8 h
At + 30 °C	~5 h

Drying Stage 6

	Dry film thickness 80 μm
+ 5 °C after	12 h
+ 10 °C after	9.5 h
+ 20 °C after	6 h
+ 40 °C after	75 min
+ 80 °C after	20 min

Waiting Time / Overcoating

Min. until drying stage 6 is achieved

Max. 4 years

In case of longer waiting times please contact Sika.

Prior to further applications possible contamination must be removed.

Drying time

Final drying time

Depending on film thickness and temperature full hardness is achieved after 1-2 weeks. Tests of the completed coating system should only be carried out after final curing.

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.

Preview TDS

Download TDS

General Specifications
Ambalaj	SikaCor EG-1: 15 kg net; Sika Thinner EG: 10 l and 3 l; SikaCor Cleaner: 25 l
Baza chimică	Epoxy resin
Utilizare	Intermediate coat for steel surfaces exposed to atmospheric conditions
Metoda de aplicare	Airless spray or brush/roller
Zona de utilizare	Exterior
Culoare	Grey Metallic - DB 701
Temperatura aerului ambiant	+5 °C min.
Condiții de depozitare	In originally sealed containers in a cool and dry environment.
Timp de întărire	N/A
Timp de lucru	At + 10 °C~12 hAt + 20 °C~8 hAt + 30 °C~5 h
Densitate	1.6 kg/L
Consum	0.215 kg/m²

High-solid epoxy-based intermediate coat

Excellent adhesion to hot dip galvanized steel, zinc spraying, stainless steel and aluminium
High film thickness per coat (up to 120 μm)
Very good corrosion protection
Tough elastic and hard but not brittle
Largely insensitive against shock and impact

Usage

Advantages

Excellent adhesion to hot dip galvanized steel, zinc spraying, stainless steel and aluminium
High film thickness per coat (up to 120 μm)
Very good corrosion protection
Tough elastic and hard but not brittle
Largely insensitive against shock and impact

Packaging

SikaCor EG-1	15 kg and 3 kg net.
Sika Thinner EG	10 l and 3 l
SikaCor Cleaner	25 l

Colour

Grey metallic approx. DB 701

Grey metallic approx. DB 702, mat.-no. 687.12

Grey metallic approx. DB 703, mat.-no. 687.13

Green metallic approx. DB 601, mat.-no. 687.14

White

Slight colour deviations are possible due to raw material characteristics.

Technical Information

Chemical Resistance

Weather, water, sewage, seawater, smoke, de-icing salts, acid and lye vapours, oils, grease and short term exposure to fuels and solvents.

Thermal Resistance

Dry heat up to + 150 °C, short term up to + 180 °C
Damp heat up to approx. + 50 °C
In case of higher temperatures please consult Sika.

Application Information

Mixing Ratio

Components A : B

By weight	90 : 10
By volume	4.7 : 1

Thinner

Sika Thinner EG
If necessary max. 5 % Sika Thinner EG may be added to adapt the viscosity.

Product Temperature

Min. + 5 °C

Relative Air Humidity

Max. 85 %, except the surface temperature is significantly higher than the dew point temperature, it shall be at least 3 K above dew point.

Surface Temperature

Min. + 5 °C

Pot Life

At + 10 °C	~12 h
At + 20 °C	~8 h
At + 30 °C	~5 h

Drying Stage 6

	Dry film thickness 80 μm
+ 5 °C after	12 h
+ 10 °C after	9.5 h
+ 20 °C after	6 h
+ 40 °C after	75 min
+ 80 °C after	20 min

Waiting Time / Overcoating

Min. until drying stage 6 is achieved

Max. 4 years

In case of longer waiting times please contact Sika.

Prior to further applications possible contamination must be removed.

Drying time

Final drying time

Depending on film thickness and temperature full hardness is achieved after 1-2 weeks. Tests of the completed coating system should only be carried out after final curing.