Single component, water-based, PU-acrylic hybrid resin coating for walls and ceilings with a gloss finish. Sikagard-407 W is a 1-part, water-based, modified acrylic resin coating. It contains an organic in-film preservative and provides a gloss finish. - Good resistance to repeated cleaning and disinfection regimes using mild detergents and cleaning solutions
- Tough
- High durability
- Good opacity (covering power)
- Good water vapour permeability
- Low odour
- Seamless
- Easy to clean
- Easy to apply
|
Usage Sikagard-407 W is used as a top coat or standalone coating for walls and ceilings Sikagard-407 W is used on: - Concrete
- Bricks
- Gypsum and cement-based substrates
- Metal
- Timber
- Tiles
- Plastic
Please note: - The Product may only be used for interior applications.
- The Product may only be used by experienced professionals.
Advantages - Good resistance to repeated cleaning and disinfection regimes using mild detergents and cleaning solutions
- Tough
- High durability
- Good opacity (covering power)
- Good water vapour permeability
- Low odour
- Seamless
- Easy to clean
- Easy to apply
Packaging 5 litres (6.35 kg) drums 15 litres (19.05 kg) drums |
Technical Information Tensile adhesion strength | > 1.5 N/mm² (failure in concrete primed with Sika Bonding Primer) | (EN 1542) |
Chemical Resistance Disinfection with hydrogen peroxide vapour: Resistant to Bioquell VHP systems. Good short-term resistance to mild acids, alkalis, cleaning agents and disinfectants. Please contact Sika Technical Services for specific information.
|
Application Information Ambient Air Temperature | Maximum | +35 °C | | Minimum | +8 °C |
Dew Point Beware of condensation. The substrate and uncured applied product must be at least +3 °C above dew point to reduce the risk of condensation on the surface of the applied product. Substrate Temperature | Maximum | +35 °C | | Minimum | +8 °C |
Waiting Time / Overcoating Before applying Sikagard-407 W on Sikagard-407 W, allow: | Temperature | Minimum | Maximum | | +10 °C | 4 hours | 7 days | | +20 °C | 2 hours | 7 days | | +30 °C | 7 days | 7 days |
Before applying Sikagard-407 W on Sikagard-403 W, allow: | Temperature | Minimum | Maximum | | +10 °C | 4 hours | 7 days | | +20 °C | 1 hour | 7 days | | +30 °C | 1 hour | 7 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity. Applied Product Ready for Use | Temperature | Touch dry | Full cure | | +10 °C | 8 hours | 7 days | | +20 °C | 4 hours | 7 days | | +30 °C | 3 hours | 7 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
