Sikafloor Marine-530, Imo-Approved 2K Pu Decorative Flooring Resin, Exterior, 20 Kg
SIKA
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more| IMO approved self-levelling, 2-component polyurethane decorative resin Sikafloor Marine-530 is a self-levelling 2-component polyurethane and can be used as interior decorative resin and levelling compound for decks in both interior and exterior. Sikafloor Marine-530 has been tested according to FTP Code system and approved according the IMO Marine Equipment Directives.
| |||||||||||||||||||||||
PRODUCT BENEFITS
UsageSikafloor Marine-530 is designed as a component of the Sikafloor Marine Deco systems in ship and boat construction. Sikafloor Marine-530 can be used for smoothing of surface irregularities of metallic floors (steel, aluminum) as primary deck covering material. Sikafloor Marine-530 is IMO approved up to a max. of 2.8 kg/m2 as per the corresponding Application Manual.This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility. Packaging
Sikafloor Marine-530 (A)
Sikafloor Marine-530 (B)
| |||||||||||||||||||||||
Typical Product Data
| |||||||||||||||||||||||
Technical Information CURE MECHANISM The curing of Sikafloor Marine-530 takes place by a chemical reaction of the two components. CHEMICAL RESISTANCE Chemical resistance is dependent from the topcoat. In case of chemical exposure conduct project related testing. | |||||||||||||||||||||||
Application Information Surface Preparation Steel decks need to be prepared to a cleanliness factor of SA 2.5 (ISO 8501). Ensure decks are free of dirt, grease, oil and loose particles. Aluminum decks shall not be shot blasted but need to be sanded instead, followed by vacuum cleaning. The prepared metallic surfaces need to be primed with SikaCor ZP Primer. Cementitious substrates have to be mechanically prepared to remove laitance. All dust, loose and friable material must be completely removed by vacuum before the next application. Apply Sikafloor -150 / -151 as a primer ensuring the substrate moisture content is ≤ 4 %. The application area must be protected against weather (draught, etc.) to fulfill the referenced substrate and climate conditions. Application Sikafloor Marine-530 is poured and spread evenly by means of a notched trowel or pin-rake on a properly levelled surface. If needed pre-level with Sikafloor Marine-530 or another suitable material. In critical areas a spike roller can be used to improve levelling. Always consider the pot life to keep a wet edge. In case of deck levelling or sloped surfaces contact Technical Department of Sika Industry. Prior to application, always consult the most current corresponding Application Manual. Curing Indications regarding curing details see table below.
A) food trolleys and light rolling equipments on soft wheels Removal Uncured Sikafloor Marine-530 can be removed from tools and equipment with Sika Colma Cleaner or another suitable solvent. Once cured, the material can only be removed mechanically. Do not use solvents on skin. Application Limits In case of highly exposed interior UV areas Sikafloor Marine-530 needs to be protected by Sikafloor Marine-505 or use Sikafloor Marine-590. Black synthetic deck caulking excluded. Freshly applied Sikafloor Marine-530 must be protected from damp, condensation and water for at least 5 days. Uncured material reacts in contact with water (foaming). STORAGE CONDITIONS Sikafloor Marine-530 (B) has to be kept between 5 °C and 30 °C in a dry place. Do not expose it to direct sunlight. After opening of the packaging, the contents need to be protected against moisture. Minimum temperature during transportation is 5 °C. |