Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sikagard Wallcoat N, Coloured Epoxy Wall Seal Coat, Water-Based, Exterior, White, 20 Kg

Sikagard Wallcoat N, Coloured Epoxy Wall Seal Coat, Water-Based, Exterior, White, 20 Kg

Cod produs: PTG259.00164
Share

Sikagard Wallcoat N, Coloured Epoxy Wall Seal Coat, Water-Based, Exterior, White, 20 Kg

Cod produs: PTG259.00164
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sikagard Wallcoat N, Coloured Epoxy Wall Seal Coat, Water-Based, Exterior, White, 20 Kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sikagard Wallcoat N, Coloured Epoxy Wall Seal Coat, Water-Based, Exterior, White, 20 Kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Sikagard WallCoat N is a two part, water based, coloured epoxy resin based seal coat.

    • Solvent free
    • Good mechanical and chemical resistance
    • High build
    • Impervious to liquids
    • Easy to clean
    • High resistance to carbonation
    • Excellent decontamination properties
    • Good opacity
    • Odourless
    • Easy to mix and to apply
    Usage
    • Application on concrete and cementitious substrates
    • Coloured seal coat for interior wall surfaces
    • Suitable for clean rooms
    • Suitable for production facilities in the food and beverage industry, car parks, storage and logistic areas
    Advantages
    • Solvent free
    • Good mechanical and chemical resistance
    • High build
    • Impervious to liquids
    • Easy to clean
    • High resistance to carbonation
    • Excellent decontamination properties
    • Good opacity
    • Odourless
    • Easy to mix and to apply
    Packaging

    Part A

    14.60 kg drums

    Part B

    5.40 kg drums
    Colour

    White, other colours available on request
    Technical Information
    Abrasion Resistance

    94 mg (CS10/1000cy/100 0g)

    (ASTM D 4060)

    Tensile Adhesion Strength

    > 1.5 N/mm² to concrete

    (ISO 4624)

    Chemical Resistance

    Please contact Sika technical service for specific information.

    Thermal Resistance

    Exposure

    Dry heat

    Permanent

    +50°C

    max. 3 days

    +80°C

    max. 12 hours+100°C
    Application Information
    Mixing Ratio

    Part A : Part B = 73 : 27 by weight / 65:35 by volume
    Layer Thickness

    approx. 0.15 mm per layer
    Ambient Air Temperature

    +10°C … +40°C
    Relative Air Humidity

    < 75%
    Substrate Temperature

    +10°C … +30°C
    ≥3°C above dew point, beware of condensation
    Pot Life

    Temperature

    Time

    +10°C

    approx. 150 minutes

    +20°C

    approx. 90 minutes

    +30°Capprox. 60 minutes
    Curing Time

    Temperature

    Minimum

    Maximum

    +10°C

    3 hours

    7 days

    +20°C

    3 hours

    7 days

    +30°C

    2.5 hours

    7 days

     

     

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging Part A: 14.6 kg drum; Part B: 5.4 kg drum
    Chemical Base Epoxy resin, water based
    Usage Interior wall seal coat for food, beverage, and logistics areas
    Application Method Roller or airless spray
    Usage Area Exterior
    Color White, other colours available on request
    Ambient Air Temperature +10 °C min. / +40 °C max.
    Storage Conditions The packaging must be stored properly in original, unopend and undamaged sealed packaging, in dry conditions at temperatures between +5°C and +30°C. Protected from direct sunlight.
    Curing Time +10 °C 3 hours; +20 °C 3 hours; +30 °C 2.5 hours
    Working Time +10 °C ~ 150 minutes; +20 °C ~ 90 minutes; +30 °C ~ 60 minutes
    Density Part A: approx. 1.58 kg/L; Part B: approx. 1.07 kg/L; Mixed resin: approx. 1.39 kg/L
    Consumption approx. 0.28 kg/m² per layer
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate