Sari la conținut
  1. All Products
  2. Sika Ucrete PLC, Scratch Coat Primer for Ucrete Floors, Interior, Greyish White, 20.13 Kg
Sika Ucrete PLC, Scratch Coat Primer for Ucrete Floors, Interior, Greyish White, 20.13 Kg

Sika Ucrete PLC, Scratch Coat Primer for Ucrete Floors, Interior, Greyish White, 20.13 Kg

Șape
SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Read more
https://www.polytrade.global/web/image/product.template/18135/image_1920?unique=ab4a244
You have already submitted a query for this product today.

Această combinație nu există.

Contactați-ne
Preview TDS
Download TDS
General Specifications
Ambalaj Part 1: 2.67 kg/pail; Part 2: 2.86 kg/pail; Part 3: 14.6 kg/bag; Part 1+2+3: 20.13 kg
Utilizare Scratch coat to seal concrete before Ucrete overlay
Baza chimică Waterborne polyurethane
Zona de utilizare Interior
Culoare Greyish white
Condiții de depozitare In covered warehouse conditions, above 5°C and below 30°C and out of direct sunlight. Materials must be raised off the floor and kept dry. Liquid components must be protected from frost.
Densitate Mixture: ~2.0 kg/L
Consum 2 kg/mm/m² ; 2-4 kg/m² ; 5-10 m²/unit
Grosimea aplicării N/A
Temperatura aerului ambiant +10°C min. / +30°C max.
Temperatura substratului +10°C min. / +30°C max.
Timp de așteptare Before applying Ucrete on PLC: +10°C – 16h / +20°C – 8h

Scratch coat Primer for Sika Ucrete Flooring Systems

Sika Ucrete PLC is a scratch coat primer applied by trowel at a thickness of 0.5 to 3mm. Sika Ucrete PLC is not a finished floor and must be overlaid by the appropriate Sika Ucrete floor finish.

  • Excellent air quality.
  • Suitable for application on to 7day old concrete and 3day old polymer screeds.
  • Allows application of suitable Ucrete flooring systems after approximately 8 hours at 20°C.
  • High temperature resistance for floors in extreme environments.
Usage
  • Sika Ucrete PLC is applied as a scratch coat to prepared concrete substrates to completely seal the substrate prior to overlaying with Sika Ucrete industrial flooring. Sika Ucrete PLC fills in anchor grooves and provides a smooth even substrate.  
Advantages
  • Excellent air quality.
  • Suitable for application on to 7day old concrete and 3day old polymer screeds.
  • Allows application of suitable Ucrete flooring systems after approximately 8 hours at 20°C.
  • High temperature resistance for floors in extreme environments.
Packaging

Part 1

2.67 kg/pail

Part 2

2.86 kg/pail

Part 3

14.6 kg/bag

Part 1+2+320.13 kg
Colour

Greyish white
Technical Information
Tensile adhesion strength

≥ 2.0 MPa (failure in concrete)

Resistance to Alkalinity

Saturated Ca(OH)2 for 48h
Application Information
Mixing Ratio

Parts 1:2:3 = Mix full units only.
Product Temperature

+10 °C min./+30°C max.
Optimal material temperature range : 15°C - 25°C
Ambient Air Temperature

+10 °C min./+30°C max.
Optimal ambient air temperature range : 15°C - 25°C
Relative Air Humidity

80% r.h. max.
Dew Point

Beware of condensation!
The substrate and uncured floor must be at least 3°C above the dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature

+10 °C min./+30°C max.
Optimal substrate temperature range : 15°C - 25°C
Substrate Moisture Content

≤ 8% pbw moisture content.
Test method: Sika-Tramex meter or CM - measurement.
No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating

Before applying Sika Ucrete Industrial Flooring on Sika Ucrete PLC allow:

Substrate temperatureMinimumMaximum
+10°C16h

*

+20°C

8h

*

Note: Times are approximate and will be affected by changing ambient condition.