Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Ucrete PFS, Fast-Curing Primer Slurry for Ucrete Floors, Interior, 12.69 Kg

Sika Ucrete PFS, Fast-Curing Primer Slurry for Ucrete Floors, Interior, 12.69 Kg

Cod produs: PTG260.00004
Share

Sika Ucrete PFS, Fast-Curing Primer Slurry for Ucrete Floors, Interior, 12.69 Kg

Cod produs: PTG260.00004
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Ucrete PFS, Fast-Curing Primer Slurry for Ucrete Floors, Interior, 12.69 Kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika Ucrete PFS, Fast-Curing Primer Slurry for Ucrete Floors, Interior, 12.69 Kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Rapid curing slurry primer for Sika Ucrete flooring

    Sika Ucrete PFS is a rapid curing slurry primer applied by squeegee and trowel to prepared concrete substrates. It provides a smooth, even and completely sealed substrate prior to overlaying with Sika Ucrete industrial flooring.

    • Expert installation by fully trained and licensed applicators
    • Suitable for application on to 7-day-old concrete and 3-day-old polymer screed
    Usage
    Sika Ucrete PFS is used as a primer for Sika Ucrete industrial flooring systems. Sika Ucrete PFS is used within wet and dry process areas including the following application areas:
    • Food and beverage facilities
    • Pharmaceutical facilities
    • Chemical and processing facilities
    • Manufacturing facilities and workshops
    Please note:
    • The Product may only be used by experienced professionals.
     
    Advantages
    • Expert installation by fully trained and licensed applicators
    • Suitable for application on to 7-day-old concrete and 3-day-old polymer screed
    • Overcoating time of approximately 3 hours at +20 °C
    • Long open time
    • Low VOC emissions
    • Good adhesion to green or hardened damp concrete
    • Good temperature resistance
    • Non-tainting from the end of mixing
    Packaging

    12.69 kg

    Refer to the current price list for available packaging variations.
    Technical Information
    Tensile adhesion strength

    > 2.0 N/mm² (concrete failure)

    (EN 1542)

    Chemical Resistance

    Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
    Application Information
    Layer Thickness

    0.3 mm to 1.0 mm
    Product Temperature

    Maximum

    +20 °C

    Minimum

    +10 °C
    Ambient Air Temperature

    Maximum

    +30 °C

    Minimum

    +5 °C
    Dew Point

    Beware of condensation. The substrate and uncured applied product must be at least +3 °C above the dew point to reduce the risk of condensation or blooming on the surface of the applied product. Low temperatures and high humidity conditions increase the probability of blooming.
    Substrate Temperature

    Maximum

    +30 °C

    Minimum

    +5 °C
    Waiting Time / Overcoating

    +5 °C and 50 % r.h.

    6 hours

    +10 °C and 50 % r.h.

    3 hours

    +20 °C and 50 % r.h.

    2 hours

    +30 °C and 50 % r.h.

    2 hours

    Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 12.69 kg
    Usage Primer for Ucrete flooring systems
    Chemical Base Water-based polyurethane cement hybrid
    Usage Area Interior
    Color N/A
    Storage Conditions The Product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to the packaging.Refer to the current Safety Data Sheet for information on safe handling and storage.
    Density N/A
    Consumption 0.6-2.0 kg/m²
    Application Thickness 0.3 mm to 1.0 mm
    Ambient Air Temperature +5°C min. / +30°C max.
    Substrate Temperature +5°C min. / +30°C max.
    Waiting Time +5°C – 6h / +10°C – 3h / +20°C – 2h / +30°C – 2h
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate