Sika CarboDur S1512, Laminates for Strengthening Concrete Timber Masonry Steel and Composites, Interior & Exterior, Black, 150 mm x 250 m

Category: Consolidare structurală

SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Această combinație nu există.

Sika CarboDur plates are pultruded carbon fibre reinforced polymer (CFRP) laminates, designed for strengthening concrete, timber, masonry, steel and fibre reinforced polymer structures.
Sika CarboDur plates are bonded onto the structure as externally bonded reinforcement using Sikadur-30 epoxy resin based adhesive for normal temperatures during application and/or service.
Please refer to the relevant Product Data Sheet(s) for more detailed information about each of these adhesives.

Non-corroding.
Very high strength.
Excellent durability and fatigue resistance.
Unlimited lengths, no joints required.
Low system thickness, simple execution of plate intersections or crossings.
Easy transportation (rolls).
Lightweight, very easy to install, especially overhead (without temporary support).
Minimum preparation of plate, applicable in several layers.
Smooth edges without exposed fibres as result of production by pultrusion.
Extensive Testing and Approvals available from many countries worldwide.

Usage

Sika CarboDur systems are used to improve, increase or repair the performance and resistance of structures for:
Increased Load Carrying Capacity:

Increasing the load capacity of floor slabs, beams and bridge sections.
For the installation of heavier machinery.
To stabilise vibrating structures.
For changes in building use.

Damage to structural elements due to:

Deterioration of the original construction materials.
Steel reinforcement corrosion.
Accidents (vehicle impact, earthquakes, fire).

Improvement of serviceability and durability:

Reduced deflection and crack width.
Stress reduction in the steel reinforcement.
Improved fatigue resistance.

Change of the structural system:

Removal of walls and/or columns.
Removal of floor and wall sections to create access/openings.

Resistance to possible events:

Increased resistance to earthquakes, impact or explosion, etc.

To repair design or construction defects such as:

Insufficient/inadequate reinforcement.
Insufficient/inadequate structural depth.

Advantages

Non-corroding.
Very high strength.
Excellent durability and fatigue resistance.
Unlimited lengths, no joints required.
Low system thickness, simple execution of plate intersections or crossings.
Easy transportation (rolls).
Lightweight, very easy to install, especially overhead (without temporary support).
Minimum preparation of plate, applicable in several layers.
Smooth edges without exposed fibres as result of production by pultrusion.
Extensive Testing and Approvals available from many countries worldwide.

Packaging

Cut to size in non-returnable cardboard packaging.
Supplied in rolls of 250 m in non-returnable cardboard boxes.

Colour

Carbon fibre reinforced polymer with an epoxy matrix, black.

Technical Information

Laminate Tensile Strength

Mean value	3 100 N/mm²
5 % fractile-value	2 900 N/mm²

Values in the longitudinal direction of the fibres.

Laminate Tensile Modulus of Elasticity

Mean value	170 000 N/mm²
5 % fractile-value	165 000 N/mm²

Values in the longitudinal direction of the fibres.

Laminate Elongation at Break

Strain mean value

1.80 %

Values in the longitudinal direction of the fibres.

Glass transition temperature

>100 °C

(EN 61006)

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.

Preview TDS

Download TDS

General Specifications
Ambalaj	250 m
Lăţime	150.0 mm
Grosime	1.2 mm
Aria secțiunii transversale	180 mm² mm²
Lungime	250.0 m
Construcții	Carbon fibre reinforced polymer with an epoxy matrix
Utilizare	Flexural strengthening: load increase (beams, slabs, bridges), vibration damping, durability upgrade, seismic/impact resistance, defect correction
Zona de utilizare	Interior & Exterior
Culoare	Black
Condiții de depozitare	Store in original, unopened, sealed and undamaged packaging in dry conditions at temperatures of max. +50 °C. Protect from direct sunlight.Transportation: only in the original packaging, or otherwise adequately protected against any mechanical damage
Densitate	N/A
Consum	0.68 − 1.00 kg/m

Non-corroding.
Very high strength.
Excellent durability and fatigue resistance.
Unlimited lengths, no joints required.
Low system thickness, simple execution of plate intersections or crossings.
Easy transportation (rolls).
Lightweight, very easy to install, especially overhead (without temporary support).
Minimum preparation of plate, applicable in several layers.
Smooth edges without exposed fibres as result of production by pultrusion.
Extensive Testing and Approvals available from many countries worldwide.

Usage

Sika CarboDur systems are used to improve, increase or repair the performance and resistance of structures for:
Increased Load Carrying Capacity:

Increasing the load capacity of floor slabs, beams and bridge sections.
For the installation of heavier machinery.
To stabilise vibrating structures.
For changes in building use.

Damage to structural elements due to:

Deterioration of the original construction materials.
Steel reinforcement corrosion.
Accidents (vehicle impact, earthquakes, fire).

Improvement of serviceability and durability:

Reduced deflection and crack width.
Stress reduction in the steel reinforcement.
Improved fatigue resistance.

Change of the structural system:

Removal of walls and/or columns.
Removal of floor and wall sections to create access/openings.

Resistance to possible events:

Increased resistance to earthquakes, impact or explosion, etc.

To repair design or construction defects such as:

Insufficient/inadequate reinforcement.
Insufficient/inadequate structural depth.

Advantages

Non-corroding.
Very high strength.
Excellent durability and fatigue resistance.
Unlimited lengths, no joints required.
Low system thickness, simple execution of plate intersections or crossings.
Easy transportation (rolls).
Lightweight, very easy to install, especially overhead (without temporary support).
Minimum preparation of plate, applicable in several layers.
Smooth edges without exposed fibres as result of production by pultrusion.
Extensive Testing and Approvals available from many countries worldwide.

Packaging

Cut to size in non-returnable cardboard packaging.
Supplied in rolls of 250 m in non-returnable cardboard boxes.

Colour

Carbon fibre reinforced polymer with an epoxy matrix, black.

Technical Information

Laminate Tensile Strength

Mean value	3 100 N/mm²
5 % fractile-value	2 900 N/mm²

Values in the longitudinal direction of the fibres.

Laminate Tensile Modulus of Elasticity

Mean value	170 000 N/mm²
5 % fractile-value	165 000 N/mm²

Values in the longitudinal direction of the fibres.

Laminate Elongation at Break

Strain mean value

1.80 %

Values in the longitudinal direction of the fibres.

Glass transition temperature

>100 °C

(EN 61006)