Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika MonoTop-1010, Cementitious Bonding Primer With Corrosion Protection, Interior & Exterior, Grey, 25 kg

Sika MonoTop-1010, Cementitious Bonding Primer With Corrosion Protection, Interior & Exterior, Grey, 25 kg

Cod produs: PTG276.00030
Share

Sika MonoTop-1010, Cementitious Bonding Primer With Corrosion Protection, Interior & Exterior, Grey, 25 kg

Cod produs: PTG276.00030
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika MonoTop-1010, Cementitious Bonding Primer With Corrosion Protection, Interior & Exterior, Grey, 25 kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika MonoTop-1010, Cementitious Bonding Primer With Corrosion Protection, Interior & Exterior, Grey, 25 kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Bonding primer and reinforcement corrosion protection cement based slurry containing recycled waste materials

    Sika MonoTop®-1010 is a 1-part, cementitious, polymer modified coating material used as bonding primer and reinforcement corrosion protection. It contains recycled waste materials which leads to a reduced carbon footprint compared to an equivalent performing mortar.

    • Uses recycled waste materials.
    • Easy to use, just add water.
    • Good adhesion to concrete and steel.
    • Good resistance to water and chloride penetration.
    • Can be applied with a brush or by wet spray technique.
    Usage
    Sika MonoTop®-1010 may only be used by experienced professionals.
    • Bonding primer as part of a concrete repair system.
    • Reinforcement corrosion protection as part of a concrete repair system.
    • Suitable for control of anodic areas (Principle 11, method 11.1 of EN 1504-9).
    • Interior and exterior use.
     
    Advantages
    • Uses recycled waste materials.
    • Easy to use, just add water.
    • Good adhesion to concrete and steel.
    • Good resistance to water and chloride penetration.
    • Can be applied with a brush or by wet spray technique.
    Packaging

    12 kg recycled plastic pail

    25 kg bag
    Colour

    Grey powder.
    Technical Information
    Compressive Strength

    ~50 MPa after 28 days

    (EN 12190)

    Tensile adhesion strength

    ~2,0 MPa after 28 days

    (EN 1542)

    Lap Shear Strength

    Pass

    (EN 15184)

    Diffusion Resistance to Water Vapour

    ~100 µH2O

    Lap Shear Strength

    ~1200 µCO2

    Corrosion Test

    Pass

    (EN 15183)
    Application Information
    Mixing Ratio

    For brush application

    ~5,25 L water (21 %) per 25 kg bag

    For spraying application

    ~5,0 L water (20 %) per 25 kg bag
    Fresh mortar density

    ~2,0 kg/l
    Layer Thickness

    Bonding primer: sufficient to coat the concrete surface in a thin layer filling pores and voids.

    Reinforcement:  corrosion protection - 2 mm minimum thickness.
    Ambient Air Temperature

    +5 °C minimum / +30 °C maximum
    Substrate Temperature

    +5 °C minimum / +30 °C maximum
    Pot Life

    ~90 minutes for 20 % water (machine applied)

    ~120 minutes for 21 % water (manual application)
    Waiting Time / Overcoating

    Apply concrete repair mortar wet on wet onto bonding primer.

    Apply concrete repair mortar wet on dry onto reinforcement corrosion protection.

     

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 25 kg
    Chemical Base Portland cement, cement replacement, re-dispersible polymer powder, selected aggregates and additives.
    Usage Bonding primer and anti-corrosion agent in concrete repair systems
    Application Method Brush or spray
    Usage Area Interior & Exterior
    Color Grey
    Service Temperature +5 °C min. / +30 °C max.
    Storage Conditions Product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +35 °C. Always refer to packaging.
    Density 2,0 kg/l
    Consumption 1,5–2,0 kg / m2 / 1 mm
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate