Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Icosit KC 330 Primer, 1-Part Pu Primer for Icosit Kc 330/340 Systems, Exterior, 3 L

Sika Icosit KC 330 Primer, 1-Part Pu Primer for Icosit Kc 330/340 Systems, Exterior, 3 L, Color: Yellowish-Brown

Cod produs: PTG276.00034
Share

Sika Icosit KC 330 Primer, 1-Part Pu Primer for Icosit Kc 330/340 Systems, Exterior, 3 L, Color: Yellowish-Brown

Cod produs: PTG276.00034
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Icosit KC 330 Primer, 1-Part Pu Primer for Icosit Kc 330/340 Systems, Exterior, 3 L

Această combinație nu există.

Cere ofertă Cere ofertă
  • Color
Product Image
Sika Icosit KC 330 Primer, 1-Part Pu Primer for Icosit Kc 330/340 Systems, Exterior, 3 L

0,00 € fără TVA 0.0 EUR

1,00 lei

Add to Cart

1-pack Polyurethane Primer for Icosit® KC 330 / 340 product range

Sika® Icosit® KC 330 Primer is a 1-pack, polyurethane ready to use, solvented, reaction-curing primer.

  • Highly abrasion resistant.
  • Good penetration and substrate stabilisation.
  • Moisture-curing.
  • Tough-hard.
Usage
Adhesion promoter as pre-treatment of dry concrete, steel and asphalt substrates. For improving adhesion of the Icosit® KC 330 / 340 range of products.  
Advantages
  • Highly abrasion resistant.
  • Good penetration and substrate stabilisation.
  • Moisture-curing.
  • Tough-hard.
Packaging

3 Litre container
Colour

Yellowish-brown / transparent
Technical Information
Service Temperature

-40 °C min. / +80 °C max.

short term up to 150 °C

Thermal Resistance

Dry heat short-term up to ~+150 °C, liquids up to ~ +60 °C

Chemical Resistance

Long-term Resistant Against:

  • Water
  • Many detergent solutions
  • Seawater

Temporary Resistant Against:

  • Mineral oil, diesel fuel

Short-term or No Resistance Against:

  • Organic solvents (esters, ketones, aromates) and alcohol
  • Concentrated lyes and acids

Contact Sika® Technical Services for specific information.
Application Information
Product Temperature

Condition product before application preferably at ~+15 °C
Ambient Air Temperature

+5 °C min. / +35 °C max.
Relative Air Humidity

30 % min. / 70 % max.
Substrate Temperature

+5 °C min. / +35 °C max
Substrate Moisture Content

≤ 3 % parts by weight

+3 °C max. above dew point temperature
Pot Life

Contents of opened container should be used within the same day.
Waiting Time / Overcoating

At 40 % - 60 % relative humidity

 

+10 °C

+20 °C

+30 °C

Minimum

3 hours

1 hour

1 hour

Maximum

3 days

3 days

3 days

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Vezi Fisa Tehnica
Descarca Fisa Tehnica

Specificatii pentru Sika Icosit KC 330 Primer, 1-Part Pu Primer for Icosit Kc 330/340 Systems, Exterior, 3 L

Color Yellowish-Brown or Transparent
General Specifications
Packaging 3 L
Chemical Base 1-pack polyurethane
Usage Adhesion promoter for dry concrete, steel, and asphalt for Icosit use
Application Method Brush or roller
Usage Area Exterior
Color Yellowish-brown
Service Temperature +5 °C min. / +35 °C max.
Storage Conditions The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10 °C and +25 °C. Always refer to packaging.
Density ~1,0 kg/l(ISO 2811-1)
Consumption ~ 0,1 kg/m² - 0,2 kg/m²
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

Produse Recent Vizualizate