Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sikagard-551 S Elastic Primer, Solvented Primer for Dense/Porous Concrete Surfaces, Exterior, Slightly Yellowish

Sikagard-551 S Elastic Primer, Solvented Primer for Dense/Porous Concrete Surfaces, Exterior, Slightly Yellowish, Packing: 10 L

Cod produs: PTG276.00086
Share

Sikagard-551 S Elastic Primer, Solvented Primer for Dense/Porous Concrete Surfaces, Exterior, Slightly Yellowish, Packing: 10 L

Cod produs: PTG276.00086
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sikagard-551 S Elastic Primer, Solvented Primer for Dense/Porous Concrete Surfaces, Exterior, Slightly Yellowish

Această combinație nu există.

Cere ofertă Cere ofertă
  • Packing
Product Image
Sikagard-551 S Elastic Primer, Solvented Primer for Dense/Porous Concrete Surfaces, Exterior, Slightly Yellowish

0,00 € fără TVA 0.0 EUR

1,00 lei

Add to Cart

Sikagard®-551 S Elastic Primer is a one-component, solvent containing primer for very dense or very porous concrete surfaces and/or difficult application conditions.
Sikagard®-551 S Elastic Primer is part of a system that complies with the requirements of EN 1504-2 as protective coating.

  • Deep penetration
  • Water vapour permeable
  • Surface strengthening
Usage
Priming of very dense concrete and of very porous concrete (having a tensile strength lower than 1 N/mm2)
Sikagard®-551 S Elastic Primer can also be used as primer on firmly adhering existing solvent based coatings   Sikagard®-551 S Elastic Primer is part of the Sikagard® acrylic coating system:
  • Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9)
  • Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9)
  • Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9)
Advantages
  • Deep penetration
  • Water vapour permeable
  • Surface strengthening
Packaging

10 l and 20 kg pails
Colour

Slightly yellowish liquid
Application Information
Ambient Air Temperature

+8 °C min. / +35 °C max.
Relative Air Humidity

< 80 %
Dew Point

Substrate and ambient temperature must be at least 3 °C above dew point.
Substrate Temperature

+8 °C min. / +35 °C max.
Waiting Time / Overcoating

Waiting time before coating:

Temperature

Time

+8 °C

36 hours

+20 °C18 hours

+35 °C

8 hours

Note: When application is on existing coating, waiting time prior to overcoat the primer will increase by 100 %.
Both water dispersed and solvent containing coating system can be used as subsequent topping.
Curing Treatment

Sikagard®-551 S Elastic Primer does not require any special curing but must be protected from rain for at least 6 hours at +20 °C.

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.
Vezi Fisa Tehnica
Descarca Fisa Tehnica

Specificatii pentru Sikagard-551 S Elastic Primer, Solvented Primer for Dense/Porous Concrete Surfaces, Exterior, Slightly Yellowish

Packing 10 L or 20 kg
General Specifications
Packaging 10 L
Chemical Base Solvent based polymer binder
Usage Primer for very dense or porous concrete in Sikagard systems
Application Method Brush or roller
Usage Area Exterior
Color Slightly yellowish
Service Temperature +5 °C min. / +35 °C max.
Storage Conditions Store in cool and dry conditions. Protect from direct sunlight and frost.
Density ~0.94 kg/l (at +20 °C)
Consumption 0.10–0.15 kg/m2dependent on the absorbency of the substrate
Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

Produse Recent Vizualizate