Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Injection-101 RC, Flexible Polyurethane Injection Resin for Temporary Sealing, Exterior

Sika Injection-101 RC, Flexible Polyurethane Injection Resin for Temporary Sealing, Exterior

Cod produs: PTG255.00018
Share

Sika Injection-101 RC, Flexible Polyurethane Injection Resin for Temporary Sealing, Exterior

Cod produs: PTG255.00018
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Injection-101 RC, Flexible Polyurethane Injection Resin for Temporary Sealing, Exterior

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika Injection-101 RC, Flexible Polyurethane Injection Resin for Temporary Sealing, Exterior

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Polyurethane flexible injection resin for temporary waterstopping

    Sika® Injection-101 RC is a 2-part, polyurethane, low viscous, fast foaming, water-reactive injection resin. It cures to a dense flexible foam.

    • Foaming reaction only takes place in direct contact with water
    • Can be injected as a single component system
    • Free foaming expansion up to 40 times
    • Can be accelerated using Sika® Injection-AC10 in cold temperatures (< + 10 °C)
    Usage
    • Temporary waterstopping of high water intrusions in cracks, joints and cavities in concrete and masonry.
    • Waterstopping in special applications such as bored or sheet pile walls, anchor heads and microtunneling.
    • To achieve permanent watertight crack sealing inject with Sika® Injection-201 CE or Sika® Injection-203 after temporary waterstopping.
     
    Advantages
    • Foaming reaction only takes place in direct contact with water
    • Can be injected as a single component system
    • Free foaming expansion up to 40 times
    • Can be accelerated using Sika® Injection-AC10 in cold temperatures (< + 10 °C)
    Packaging
    Part A (Resin)10 or 20 kg
    Part B ( Hardener)12,5 or 25 kg

    Refer to current price list for packaging variations.
    Colour
    Part A (Resin)Colourless
    Part B (Hardener)Brown
    Technical Information
    Expansion

    Expansion start~15 seconds after contact with water
    Expansion end~67 seconds

    Values at +20 °C
    Application Information
    Mixing Ratio

    Part A : Part B =  1:1 by volume

    Reaction times
    (PM 10081-11)

    0 % Sika® Injection-AC10 *
    Material temperature

    Expansion start

    Expansion end

    +5 °C~19 sec~89 sec

    +10 °C

    ~17 sec

    ~88 sec

    +20 °C

    ~16 sec

    ~70 sec

    5 % Sika® Injection-AC10 *
    Material temperatureExpansion start

    Expansion end

    +5 °C~12 s~57 s
    +10 °C~11 s~49 s

    +20 °C

    		~10 s~39 s

    10 % Sika® Injection-AC10 *

    Material temperature

    		Expansion start

    Expansion end

    +5 °C~9 s~41 s

    +10 °C

    		~8 s

    ~37 s

    +20 °C

    		~7 s

    ~35 s

    * Dosage of Sika® Injection-AC10 in % by weight of Sika® Injection-101 RC (Parts A+B)

     The data above are laboratory parameters and may deviate depending on the situation and conditions on site.

    The reaction speed (foam formation) is influenced by the temperatures of the mixed material, the structure and the contact water, plus the hydrodynamic conditions.

    Smaller volumes can be used at a ratio of  Part A : Part B =  1:1 by volume
    Ambient Air Temperature

    +5 °C min. / +35 °C max.
    Substrate Temperature

    +5 °C min. / +35 °C max.
    Pot Life

    ~2 hours (at + 20 °C)

    (ISO 9514)

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging Part A: 10 kg, 20 kg; Part B: 12.5 kg, 25 kg
    Width mm
    Length m
    Weight Kg
    Usage Temporary waterstopping of high water intrusions in cracks, joints and cavities in concrete and masonry.Waterstopping in special applications such as bored or sheet pile walls, anchor heads and microtunneling.To achieve permanent watertight crack sealing inject with Sika Injection-201 CE or Sika Injection-203 after temporary waterstopping
    Chemical Base Water-reactive polyurethane resin
    Usage Area Exterior
    Color Part A (Resin): Colourless; Part B (Hardener): Brown
    Storage Conditions The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +35 °C. Always refer to packaging
    Density Part A: ~1.00 kg/l; Part B: ~1.25 kg/l
    Consumption N/A
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate