Chat
Produse
Autentificare
0 Favorite
  • Products
  • S-Vap 5000 E SA, Self-adhesive Polyethylene Vapour Barrier and Carrier Membrane, Exterior, 1.08 M X 30 M

S-Vap 5000 E SA, Self-adhesive Polyethylene Vapour Barrier and Carrier Membrane, Exterior, 1.08 M X 30 M

Cod produs: PTG255.00098
Share

S-Vap 5000 E SA, Self-adhesive Polyethylene Vapour Barrier and Carrier Membrane, Exterior, 1.08 M X 30 M

Cod produs: PTG255.00098
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

S-Vap 5000 E SA, Self-adhesive Polyethylene Vapour Barrier and Carrier Membrane, Exterior, 1.08 M X 30 M

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    S-Vap 5000 E SA, Self-adhesive Polyethylene Vapour Barrier and Carrier Membrane, Exterior, 1.08 M X 30 M

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Self-adhesive vapour barrier and carrier membrane

    S-Vap 5000 E SA is a multi-layered, self-adhesive vapour barrier manufactured from polymer modified bitumen with a glass-fibre mat reinforcement and an aluminium foil top layer.

    • Ease and speed of installation from self-adhesive properties
    • Can be used in a fully adhered roof build-up. No additional fasteners required for securing the thermal insulation boards to the structural deck
    • Temporary waterproof top layer for up to 4 weeks, without the requirement for additional weight/ballast and/or mechanical fastenings
    • High self adhesion strength allows high wind design loads from 2,4 kN/m 2 to 2,8 kN/m 2
    Usage
    S-Vap 5000 E SA may only be used by experienced professionals. As a vapour barrier over most common roof deck types:
    • Concrete / cementitious
    • Metal
    • Plywood panels, timber boards, oriented strand board (OSB)
    As a carrier layer for use with approved liquid applied membranes. Temporary waterproofing layer for up to 4 weeks.
    Advantages
    • Ease and speed of installation from self-adhesive properties
    • Can be used in a fully adhered roof build-up. No additional fasteners required for securing the thermal insulation boards to the structural deck
    • Temporary waterproof top layer for up to 4 weeks, without the requirement for additional weight/ballast and/or mechanical fastenings
    • High self adhesion strength allows high wind design loads from 2,4 kN/m2 to 2,8 kN/m2
     
    • Provides an air tight layer
    • High tear resistance to foot traffic during roof build up activities
    • High water vapour resistance makes it suitable in combination with all types of membranes
    • Accommodates a wide range of roof system, deck types and substrate combinations
    • Can be bonded onto flashings, inclined or vertical surfaces
    Packaging
    Roll size

    Length30,00 m
    Width1,08 m
    Weight19,00 kg

    Refer to current price list for packaging variations
    Colour

    Surface: Aluminium foil with PET film
    Technical Information
    Resistance to Impact

    Pass (procedure A 150 mm)

    (EN 12691)

    Tensile Strength

    ≥ 500 N/50 mm  

    (EN 12311-1)

    Tear Strength

    ≥ 100 N

    (EN 12310-1)

    Joint Peel Resistance

    ≥ 50 N/50 mm

    (EN 12316-2)

    Joint Shear Resistance

    ≥ 400 N/50 mm 

    (EN 12317-2)

    Flexibility at low temperature

    -20 °C

    (EN 495-5)

    Reaction to Fire

    Class E 

    (EN ISO 11925-2: 2002)

    (EN 13501)


     

    Resistance to Alkalinity

    Pass

    (EN 1847)

    Artificial Ageing

    Pass

    (EN 1296)

    (EN 1931)


     

    Water Tightness

    Pass

    (EN 1928)

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 1.08 m x 30 m
    Width 2200.0 mm
    Length 30000.0 m
    Weight 19.0 Kg
    Usage S-Vap 5000 E SA may only be used by experienced professionals. As a vapour barrier over most common roof deck types:Concrete / cementitiousMetalPlywood panels, timber boards, oriented strand board (OSB)As a carrier layer for use with approved liquid applied membranes. Temporary waterproofing layer for up to 4 weeks
    Chemical Base Polyethylene vapour barrier membrane
    Usage Area Exterior
    Color Surface: Aluminium foil with PET film
    Storage Conditions Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between + 5 °C and + 35 °C. Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging
    Density 600 g/m² (±100)
    Consumption 200– 400 g/m
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate