Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

Cod produs: PTG260.00005
Share

Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

Cod produs: PTG260.00005
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Conductive, heavy-duty, polyurethane primer for Sika Ucrete flooring

    Sika Ucrete PLCAS is a trowel-applied, conductive primer for use on prepared concrete substrates. It fills in anchor grooves and provides a smooth, even and completely sealed substrate prior to overlaying with conductive Sika Ucrete industrial flooring systems.

    • Expert installation by fully trained and licensed applicators
    • Suitable for application on to 7-day-old concrete and 3-day-old polymer screed
    Usage
    Sika Ucrete PLCAS is used as a primer for Sika Ucrete industrial flooring systems. Sika Ucrete PLCAS is used within dry process areas including the following application areas:
    • Food and beverage facilities
    • Pharmaceutical facilities
    • Chemical and processing facilities
    • Clean rooms
    • Electronic facilities and data centres
    • Defence estates
    Please note:
    • The Product may only be used by experienced professionals.
     
    Advantages
    • Expert installation by fully trained and licensed applicators
    • Suitable for application on to 7-day-old concrete and 3-day-old polymer screed
    • Electrostatically conductive
    • Overcoating time of approximately 8 hours at +20 °C
    • Low VOC emissions
    • Good adhesion to green or hardened damp concrete
    • Good temperature resistance
    • Non-tainting from the end of mixing
    Packaging

    13.28 kg

    Refer to the current price list for available packaging variations.
    Technical Information
    Tensile adhesion strength

    > 2.0 N/mm² (concrete failure)

    (EN 1542)

    Chemical Resistance

    Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
    Application Information
    Layer Thickness

    1.0 mm to 2.0 mm
    Product Temperature

    Maximum

    +25 °C

    Minimum

    +15 °C
    Ambient Air Temperature

    Maximum

    +30 °C

    Minimum

    +12 °C
    Dew Point

    Beware of condensation. The substrate and uncured applied product must be at least +3 °C above the dew point to reduce the risk of condensation or blooming on the surface of the applied product. Low temperatures and high humidity conditions increase the probability of blooming.
    Substrate Temperature

    Maximum

    +30 °C

    Minimum

    +12 °C
    Waiting Time / Overcoating

    +10 °C and 50 % r.h.

    16 hours

    +20 °C and 50 % r.h.

    8 hours

    Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 13.28 kg
    Usage Primer for Ucrete systems in dry areas including clean rooms
    Chemical Base Water-based polyurethane cement hybrid
    Usage Area Interior
    Color N/A
    Storage Conditions The Product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to the packaging.Refer to the current Safety Data Sheet for information on safe handling and storage.
    Density N/A
    Consumption 2 kg/m² per mm of thickness
    Application Thickness 1.0 mm to 2.0 mm
    Ambient Air Temperature +12°C min. / +30°C max.
    Substrate Temperature +12°C min. / +30°C max.
    Waiting Time +10°C – 16h / +20°C – 8h
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate