Chat
Shop
Sign in
0 Wishlist
  • Products
  • Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

Product Code: PTG260.00005
Share

Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

Product Code: PTG260.00005
Share
Sika
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more

Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

This combination does not exist.

Add to RFQ RFQ
    Product Image
    Sika Ucrete PlCAS, Conductive Primer for Ucrete Antistatic Systems, Interior, 13.28 Kg

    0.00 € without VAT 0.0 EUR

    1.00 lei

    Add to Cart

    Conductive, heavy-duty, polyurethane primer for Sika Ucrete flooring

    Sika Ucrete PLCAS is a trowel-applied, conductive primer for use on prepared concrete substrates. It fills in anchor grooves and provides a smooth, even and completely sealed substrate prior to overlaying with conductive Sika Ucrete industrial flooring systems.

    • Expert installation by fully trained and licensed applicators
    • Suitable for application on to 7-day-old concrete and 3-day-old polymer screed
    Usage
    Sika Ucrete PLCAS is used as a primer for Sika Ucrete industrial flooring systems. Sika Ucrete PLCAS is used within dry process areas including the following application areas:
    • Food and beverage facilities
    • Pharmaceutical facilities
    • Chemical and processing facilities
    • Clean rooms
    • Electronic facilities and data centres
    • Defence estates
    Please note:
    • The Product may only be used by experienced professionals.
     
    Advantages
    • Expert installation by fully trained and licensed applicators
    • Suitable for application on to 7-day-old concrete and 3-day-old polymer screed
    • Electrostatically conductive
    • Overcoating time of approximately 8 hours at +20 °C
    • Low VOC emissions
    • Good adhesion to green or hardened damp concrete
    • Good temperature resistance
    • Non-tainting from the end of mixing
    Packaging

    13.28 kg

    Refer to the current price list for available packaging variations.
    Technical Information
    Tensile adhesion strength

    > 2.0 N/mm² (concrete failure)

    (EN 1542)

    Chemical Resistance

    Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
    Application Information
    Layer Thickness

    1.0 mm to 2.0 mm
    Product Temperature

    Maximum

    +25 °C

    Minimum

    +15 °C
    Ambient Air Temperature

    Maximum

    +30 °C

    Minimum

    +12 °C
    Dew Point

    Beware of condensation. The substrate and uncured applied product must be at least +3 °C above the dew point to reduce the risk of condensation or blooming on the surface of the applied product. Low temperatures and high humidity conditions increase the probability of blooming.
    Substrate Temperature

    Maximum

    +30 °C

    Minimum

    +12 °C
    Waiting Time / Overcoating

    +10 °C and 50 % r.h.

    16 hours

    +20 °C and 50 % r.h.

    8 hours

    Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Preview TDS
    Download TDS
    General Specifications
    Packaging 13.28 kg
    Usage Primer for Ucrete systems in dry areas including clean rooms
    Chemical Base Water-based polyurethane cement hybrid
    Usage Area Interior
    Color N/A
    Storage Conditions The Product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to the packaging.Refer to the current Safety Data Sheet for information on safe handling and storage.
    Density N/A
    Consumption 2 kg/m² per mm of thickness
    Application Thickness 1.0 mm to 2.0 mm
    Ambient Air Temperature +12°C min. / +30°C max.
    Substrate Temperature +12°C min. / +30°C max.
    Waiting Time +10°C – 16h / +20°C – 8h
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products