MONITORING GREENHOUSE GAS EMISSION REDUCTIONS FOR S.C. MOB SERV IMPEX S.R.L.

Renewable  energy sources are those sources in the natural environment that are available in unlimited quantities or that regenerate from natural processes at a faster rate than they are consumed. Solar energy is one of the officially recognised renewable energies.

The client desires a production plant (PvPP) with rated power of 320kWp on the roofs of the 3 halls located in the furniture factory complex of S.C. MOB SERV IMPEX S.R.L.

The photovoltaic power plant is connected to the 0.4kV voltage level in the general electrical panel of the Customer existing complex. The power plant injects electricity into the power grid of the Distribution Operator (E-Distribution) and is therefore a Prosumer. Thus the site became a "grid injection" customer. Without this project, the amount of energy consumed from sources with greenhouse gas emissions would have remained unchanged and electricity costs would have increased.

The photovoltaic panels will be mounted on a metal structure by fastening with special clamps. The design and dimensioning of the structure is based on the technical specifications of the roof, computerised.

The photovoltaic panels will have a nominal power of 470Wp, monocrystalline, with a minimum nominal efficiency of 20%. 

The inverters will be compatible with the power produced by the panels. They convert the DC supply voltage from the panels into AC voltage.

The inverters and the AC switchboard will be installed in the hall on the ground floor. The inverters will connect into a PV main switchboard, which will further connect via low voltage cable into the main switchboard of the site.

The commissioning of the system will be done by implementing the software delivered with the inverters. Through the application provided by the inverter supplier, the Customer and the Installer will be able to monitor the functionality of the Photovoltaic Power Plant, following the production of the system and the consumption of the furniture factory, metered through the devices specifically used for this purpose.

Services provided:

• Technical project photovoltaic system 

• Preparation for obtaining the Technical Approval for Connection 

• Installation of the photovoltaic system 

• Preparation of the Prosumer Dossier

• System commissioning