An advanced hybrid polymer building sealant Everbuild Tecnic Hybriflex 25LM is a one part, low modulus, chemically curing sealant combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves. - High bonding strength.
- Interior and exterior use.
- Can be applied to damp surfaces.
- Totally waterproof & weatherproof.
- Quick curing.
- Overpaintable if required.
- Permanently flexible.
- Resistant to chemicals & petrol (10 % dilute acids/alkalis, most solvents).
- Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc.
|
Usage Sealing most applications imaginable. For examples: - External and internal perimeter pointing around doors and windows, especially in mobile structures such as caravans and sealing vertical expansion joints, jointing cladding panels and bonding difficult materials such as most plastics, metals and fiberglass.
- Any application requiring high performance, durable sealing and bonding of joints.
- Applications where resistance to chemical spillage is required.
Advantages - High bonding strength.
- Interior and exterior use.
- Can be applied to damp surfaces.
- Totally waterproof & weatherproof.
- Quick curing.
- Overpaintable if required.
- Permanently flexible.
- Resistant to chemicals & petrol (10 % dilute acids/alkalis, most solvents).
- Excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc.
ConsistencyPasteCompatibility with paints Water Based: Yes (test compatibility) Solvent Based: No (with alkyd paints) Packaging 380 ml Cartridge |
Technical Information Shore A Hardness 20-30 (ISO 868 - 3 seconds)
Secant Tensile Modulus ~ 0.25 N/mm2 (ISO8339)
Elongation >400 % (ISO8339)
Movement Capability 25 % movement accommodation
Elastic Recovery >70 % (ISO7389)
Service Temperature -40 to +100 °C
Joint Design Joint Dimensions - For maximum movement accommodation, it is recommended that: 1. The sealant joint depth should be no less than 5 mm. 2. Joint depth should be 5 mm for joints up to 10 mm wide. 3. Joints above 10 mm in width should be half the width in depth up to 20 mm and minimum 10 mm for wider joints. Joint depth may be adjusted to the correct size using EVERBUILD JOINT BACKER ROD or BOND BREAKING TAPE in cases where there is not enough depth to use Backer Rod. Joint Width Calculation - Joint widths are calculated as in BS6213: Width = (M x 100)/F + M Where M = movement and F = movement accommodation factor.
|
Application Information Ambient Air Temperature +5 to +35 °C Substrate Temperature +5 to +35 °C Curing Time 0-2 mm / 24 hour at 23 °C and 50 % RH Skin Time Skin formation @ 23 °C and 50 % RH is 20-45 minutes. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
