Solvent-free elastic adhesive for Wood Flooring SikaBond-52 Wood Floor is a fast-curing elastic wood flooring adhesive for professional use. Ideal for bonding wood floors using liquid batten/beaded application. Use with solid, engineered, parquet wood floors and chipboard. - 1-component, ready to use.
- Fast curing properties.
- Floor can be sanded after 12 hours (full surface bonding, +23°C / 50% r. h., up to 1 mm adhesive thickness).
- Excellent workability, very easy to extrude.
- Good initial tack.
- Elastic, footfall sound-dampening adhesive.
- Suitable for most common types of wood floors.
- Especially suitable for problematic woods including beech, maple and bamboo.
- Suitable for bonding wood floors directly onto old ceramic tiles.
- Reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate.
- Suitable for use with subfloor heating.
- Compensates for some substrate unevenness.
- Adhesive can be sanded.
- Solvent free.
- Odourless.
|
Usage For Full Surface bonding: Solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chipboard, plywood and OSB can be bonded. For the Sika AcouBond-System: Solid wood boards (tongued and grooved), 3-ply engineered wood, chipboard, plywood and herringbone blocks can all be bonded. For detailed application instructions refer to the Product Data Sheet of the Sika AcouBond-System, or contact our Technical Department. For Beaded Application: Solid wood boards, 3-ply engineered wood and chipboard can be bonded. Advantages - 1-component, ready to use.
- Fast curing properties.
- Floor can be sanded after 12 hours (full surface bonding, +23°C / 50% r. h., up to 1 mm adhesive thickness).
- Excellent workability, very easy to extrude.
- Good initial tack.
- Elastic, footfall sound-dampening adhesive.
- Suitable for most common types of wood floors.
- Especially suitable for problematic woods including beech, maple and bamboo.
- Suitable for bonding wood floors directly onto old ceramic tiles.
- Reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate.
- Suitable for use with subfloor heating.
- Compensates for some substrate unevenness.
- Adhesive can be sanded.
- Solvent free.
- Odourless.
|
Technical Information Shore A Hardness ~ 34 (after 28 days)
Tensile Strength ~ 1.4 N/mm2, (+23°C / 50% r. h.)
Shear Strength ~ 1.1 N/mm2 , 1 mm adhesive thickness (+23°C / 50% r. h.)
Service Temperature -40°C to +70°C
|
Application Information Sag Flow Consistency: Spreads easily, trowel marks stable. Easily applied by guns. Ambient Air Temperature Ambient temperature between +15°C and +35°C. For ambient temperatures the standard construction rules are relevant. Relative Air Humidity Between 40% and 70%. Substrate Temperature During laying and until SikaBond-52 Wood Floor has fully cured the substrate and ambient temperatures should be > +15°C and with floor heating approx. < +20°C. For substrate temperatures the standard construction rules are relevant. Substrate Moisture Content Permissible substrate moisture content: - 2.5% CM for cement screed (ca. 4% Tramex / Gravimetric weight percent).
- 0.5% CM for anhydrite screed.
- 3 - 12% CM for magnesite flooring (dependent on proportion of organic components).
Permissible substrate moisture content for use with underfloor heating: - 1.8% CM for cement screed (ca. 3% Tramex / Gravimetric weight percent).
- 0.3% CM for anhydrite screed.
- 3 - 12% CM for magnesite flooring (dependent on the proportion of organic components).
For moisture contents and the quality of substrates the guidelines of the wood floor manufacturer as well as standard construction rules must be observed. Curing Rate ~ 3.5 mm / 24h (+23°C / 50% r. h.) The floor may be walked on / sanded 12 hours to 24 hours after installation ( +23°C / 50% r. h. up to 1 mm adhesive thickness dependent on climatic conditions and adhesive layer thickness). Skin Time / Laying Time ~ 60 minutes (+23°C / 50% r. h.) |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
