Water Reducing/Air Entraining Concrete Admixture SikaPaver® Frioplast A1 is a liquid water reducing / compaction aid for use in readymixed and semi-dry concrete - Enhanced compaction in semi-dry precast concrete
- Improved slip characteristics in extruded semi-dry concrete
- Increased water reduction and workability
- Improved cohesion and workability
- Improved rheology
- Reduced permeability
- Reduced bleeding and laitance, enhancing the concrete’s resistance to frost attack
|
Usage SikaPaver® Frioplast A1 promotes the distribution of microscopic air bubbles throughout the cement matrix - Semi-dry concrete production, such as hollowcore and T-beams
- Applications that require high resistance to freeze/thawing cycles
- Concrete that will be exposed to tidal conditions, splash zones and de icing salts
Advantages Provides consistent bubble size and spacing - Enhanced compaction in semi-dry precast concrete
- Improved slip characteristics in extruded semi-dry concrete
- Increased water reduction and workability
- Improved cohesion and workability
- Improved rheology
- Reduced permeability
- Reduced bleeding and laitance, enhancing the concrete’s resistance to frost attack
|
Application Information Compatibility Sika®Admixtures: - Compatibility information available on request
Cements: - All cement combinations
- Pulverised Fuel Ash (PFA) is a waste product of modern electricity generation. Only use PFA complying with the relevant British Standard in structural concrete. Such material will vary within the parameters laid down in the standard. Eg fineness, carbon content and loss on ignition. As a result, the amount of Sika® Frioplast® A1 required may vary to maintain a specific air content.
Dispensing SikaPaver® Frioplast A1 should be dispensed through suitable calibrated dosing equipment. Restrictions Overdosing may lead to increased air content leading to reduced densities and strength |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.