Chat
Produse
Autentificare
0 Favorite
  • Products
  • Sika Concrete Crack Fix, Tube-Mix Adhesive for Concrete Repairs, Interior & Exterior, Grey, 250 mL

Sika Concrete Crack Fix, Tube-Mix Adhesive for Concrete Repairs, Interior & Exterior, Grey, 250 mL

Cod produs: PTG254.00032
Share

Sika Concrete Crack Fix, Tube-Mix Adhesive for Concrete Repairs, Interior & Exterior, Grey, 250 mL

Cod produs: PTG254.00032
Share
Sika
Sika este un lider global în domeniul materialelor chimice speciale pentru construcții și industrie. Compania dezvoltă și furnizează produse și sisteme inovatoare pentru lipire, etanșare, amortizare, întărire și protecție a structurilor. Cu un accent puternic pe sustenabilitate și performanță, Sika deservește o gamă largă de aplicații, inclusiv producția de beton, hidroizolații, acoperișuri, pardoseli și consolidări structurale.
Citește tot

Sika Concrete Crack Fix, Tube-Mix Adhesive for Concrete Repairs, Interior & Exterior, Grey, 250 mL

Această combinație nu există.

Cere ofertă Cere ofertă
    Product Image
    Sika Concrete Crack Fix, Tube-Mix Adhesive for Concrete Repairs, Interior & Exterior, Grey, 250 mL

    0,00 € fără TVA 0.0 EUR

    1,00 lei

    Add to Cart

    Mix in the tube adhesive for high strength repairs to concrete.

    Sika Concrete Crack Fix is a two-part cold cure, thixotropic structural adhesive based on epoxy resin. Just mix in the tube and use for high strength repairs to concrete.

    • Applied using a standard sealant gun.
    • Can be used on damp concrete.
    • Excellent adhesion.
    • Non-sagging, can be used for overhead applications.
    • High load capacity.
    • Does not shrink on hardening.
    • Styrene free.
    • Two-part mix in the tube adhesive.
    • Economic - use only as much as required.
    • Can be applied in vertical and overhead situations.
    • Resistant to water, chemicals and solvents.
    Usage
    As a structural adhesive for:
    • Concrete.
    • Hard natural stone.
    • Ceramics, fibre cement.
    • Mortar, bricks, blocks, masonry, render,  etc.
    • Steel, iron and aluminium.
    • Wood.
    • Polyester and epoxy.
    • Fixing and fastening of handrails, railings, balustrades and supports.
    • Fixing of window and door frames.
    For concrete repairs: Interior, vertical and overhead repairs of:
    • Corners and edges.
    • Hole and void filling.
    • Crack filling and sealing of non-moving joints.
    • Joint arrises.
    • Suitable for use on damp concrete.
    Also suitable for injecting into cracks.  
    Advantages
    • Applied using a standard sealant gun.
    • Can be used on damp concrete.
    • Excellent adhesion.
    • Non-sagging, can be used for overhead applications.
    • High load capacity.
    • Does not shrink on hardening.
    • Styrene free.
    • Two-part mix in the tube adhesive.
    • Economic - use only as much as required.
    • Can be applied in vertical and overhead situations.
    • Resistant to water, chemicals and solvents.
    Thermal expansion coefficient , EN1770 9.3 x 10-5 per °C (temp range 23 °C – 60 °C) Thermal stability, EN12614 Heat deflection temp. 49 °C Bond StrengthTime Substrate Bond Strength After 3 days Dry concrete >5 N/mm2* After 3 days Damp concrete >5 N/mm2* After 3 days Steel, blast cleaned >10 N/mm2 After 3 daysDry brick>1.5 N/mm2** *100% Concrete failure **100% Brick failure
    Packaging

    250 ml Cartridge.
    Colour
    Grey
    Technical Information
    Compressive Strength

    ~50 N/mm2 (14 days, 23 °C)

    Flexural Strength

    ~20 N/mm2 (14 days, 23 °C)

    Tensile Strength

    10-15 N/mm2 (14 days, 23 °C)

    Shrinkage

    None
    Application Information
    Sag Flow

    None, suitable for overhead application.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Vezi Fisa Tehnica
    Descarca Fisa Tehnica
    General Specifications
    Packaging 250 mL
    Usage Structural Adhesive For Concrete, Metals, Repairs
    Usage Area Interior & Exterior
    Color Grey
    Chemical Base N/A
    Storage Conditions +10 °C to +25 °C - Store upright in tightly sealed container, in dry conditions, protected from sunlight.
    Density 1.35 kg/L
    Service Temperature N/A
    Application Time 10 - 15 min.
    Curing Time 24 hours
    Application Thickness 2 >< 3 mm
    Application Method Gun
    UV Resistant Yes
    Moisture Resistant Yes
    Mold Resistant No
    Paintable Yes
    Sealant Yes
    Flexible Yes
    Aceasta este o previzualizare a produselor vizualizate recent de către utilizator. Odată ce utilizatorul a văzut cel puțin un produs, acest fragment va fi vizibil.

    Produse Recent Vizualizate