SikaTack Panel, Polyurethane Adhesive for Ventilated Facade Panels, Interior & Exterior, Ivory, Packing: 300 mL
SikaTack Panel, Polyurethane Adhesive for Ventilated Facade Panels, Interior & Exterior, Ivory, Packing: 300 mL
Sika
SikaTack Panel, Polyurethane Adhesive for Ventilated Facade Panels, Interior & Exterior, Ivory
SikaTack Panel, Polyurethane Adhesive for Ventilated Facade Panels, Interior & Exterior, Ivory
0,00 €
fără TVA
1,00 lei
| 1-COMPONENT POLYURETHANE FOR PANEL BONDING IN VENTILATED FACADES SikaTack Panel is a non-sag, 1-component polyurethane of paste-like consistency for structural joints in ventilated facades and interior wall cladding between the vertically installed substructure and the panel that will be subjected to high dynamic and static stresses. It cures on exposure to atmospheric humidity. SikaTack Panel is part of the SikaTack Panel system for the economic, concealed fixing of ventilated facades.
| ||||||||||||||||||||||||||||||||||||||||||||
PRODUCT BENEFITS
UsageSikaTack Panel is suitable for structural joints in ventilated facades and cladded interior walls between the vertically installed substructure and the facade panel that will be subjected to dynamic and static stresses. Suitable substrates are anodised and coated aluminum, metal composite, high pressure laminate and ceramic materials. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.Packaging
| ||||||||||||||||||||||||||||||||||||||||||||
Typical Product Data
| ||||||||||||||||||||||||||||||||||||||||||||
Technical Information CURE MECHANISM SikaTack Panel cures by reaction with atmospheric moisture. At low temperatures the water content of the air is generally lower and the curing reaction proceeds some-what slower (see diagram 1). Diagram 1: Curing speed SikaTack Panel | ||||||||||||||||||||||||||||||||||||||||||||
Application Information Surface Preparation Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Application The standard geometry for bonding façade panels is at least 12 x 3 mm. The supplied nozzle (10 x 8 mm) ensures proper dimension of the compressed bead (see figure below).
Figure 1: Recommended bead configuration The optimum temperature for substrate and adhesive is between 15 °C and 25 °C. Do not apply at temperatures below 5 °C or above 40 °C. To avoid condensation on the surfaces, the temperature of the bonding components (e.g. façade panels, sub-frames) must be at least 3 °C higher than the dew point of the air. The skin time is significantly shorter in hot and humid climate. The panel must always be installed within 75 % of the skin time determined under local climate conditions (see General Guideline “SikaTack Panel System”). Never join bonding parts if the adhesive has built a skin. SikaTack Panel can be processed with hand, pneumatic or electric driven piston guns. Removal Uncured SikaTack Panel can be removed from tools and equipment with Sika Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using hand wipes such as Sika Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin. Application Limits SikaTack Panel used for panel bonding is always used in conjunction with SikaTack Panel Fixing Tape. SikaTack Panel Fixing Tape ensures the correct joint thickness and keeps the bonded panels initially in place. By curing SikaTack Panel builds up strength and takes over the long-term load bearing. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.