Solvent based, full-bodied bitumen compound with added fibres for reinforcement EVERBUILD BLACK JACK 905 ALL WEATHER ROOF COATING is a solvent based, full-bodied, black, brushable bitumen compound with added fibres for reinforcement. It is an effective general purpose roof coating that is resistant to wash off by rain almost immediately, and is therefore ideally suited for winter use. The product is specifically designed for general waterproofing in all roofing applications, guttering (non plastic) and structural steelwork. Dries to a tough black coating. - Fast drying.
- Fibre reinforced.
- Weatherproof.
- Unaffected by water immediately after application - can be applied when rain is imminent.
- Can also be used to bond felt.
- Brush applied.
|
Usage EVERBUILD BLACK JACK 905 ALL WEATHER ROOF COATING may be applied by brush to waterproof and re-seal many different types of roof coverings, including: 1. Asphalt roofs. 2. Built-up felt roofs. 3. Concrete roof decks. 4. Asbestos-Cement sheeting. 5. Metal sheeting, including iron, steel, zinc and lead. 6. Slates, tiles. EVERBUILD BLACK JACK 905 ALL WEATHER ROOF COATING may be used in conjunction with a rot-proof hessian reinforcement scrim or bitumen coated glass fibre scrim such as a glass membrane. EVERBUILD BLACK JACK 905 ALL WEATHER ROOF COATING may also be used as a vapour barrier on walls and roofs. Advantages - Fast drying.
- Fibre reinforced.
- Weatherproof.
- Unaffected by water immediately after application - can be applied when rain is imminent.
- Can also be used to bond felt.
- Brush applied.
Type Of Solvent White spirit Flashpoint ca. +40 °C Application Temperature +5 °C to +30 °C. Surfaces must be free from ice and water Heat Flow ResistanceThe cured film will not sag or flow under normal conditions Packaging 5 L & 25 L tins |
Technical Information Service Temperature -10 °C to +85 °C Chemical Resistance Resistant to: most salt solutions, dilute acids and alkalis, water. Not resistant to: oils, solvents and some detergent solutions/glass cleaning solutions. Reaction to Fire Wet product is flammable, dry film will burn |
Application Information Drying time 24 hours depending on drying conditions. Allow 24 hours between coats. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.