Sikaflex-529 Evolution, Sprayable Isocyanate-Free Sealant for Vehicles, Interior & Exterior, Color: Black, Packing: 290 mL
Sikaflex-529 Evolution, Sprayable Isocyanate-Free Sealant for Vehicles, Interior & Exterior, Color: Black, Packing: 290 mL
Sika
Sikaflex-529 Evolution, Sprayable Isocyanate-Free Sealant for Vehicles, Interior & Exterior
Sikaflex-529 Evolution, Sprayable Isocyanate-Free Sealant for Vehicles, Interior & Exterior
0,00 €
fără TVA
1,00 lei
| Isocyanate free sprayable sealant for vehicle bodies Sikaflex-529 Evolution is a sprayable 1-component Silane Terminated Polymer (STP) sealant that cures on exposure to atmospheric humidity. It is used for seam sealing of factory provided original structures (surface areas and beads) for vehicle body assemblies. It adheres well to all the materials commonly used in body shops, e.g. metal primers and paint coatings, metals, painted plastics and plastics.
| ||||||||||||||||||||||||||||||||||||||||||||
PRODUCT BENEFITS
UsageSikaflex-529 Evolution is designed for use as a sprayable elastic sealant for seam sealing, lap joints and stone chip protection in collision repair and vehicle body construction.Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex-529 Evolution on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility. Packaging
| ||||||||||||||||||||||||||||||||||||||||||||
Typical Product Data
| ||||||||||||||||||||||||||||||||||||||||||||
Technical Information CURE MECHANISM Sikaflex-529 Evolution cures by reaction with atmospheric moisture. At low temperatures the water content of the air is generally lower and the curing reaction proceeds somewhat slower (see diagram 1). Diagram 1: Curing speed Sikaflex-529 Evolution CHEMICAL RESISTANCE Sikaflex-529 Evolution is generally resistant to fresh water, seawater, diluted acids and diluted caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids, glycolic alcohol, concentrated mineral acids and caustic solutions or solvents. | ||||||||||||||||||||||||||||||||||||||||||||
Application Information Surface Preparation Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Application Sikaflex-529 Evolution can be processed between 5 °C and 40 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and process material is between 15 °C and 25 °C. Sikaflex-529 Evolution can be processed with manual, pneumatic or electric driven piston guns as well as pump equipment. For spray application use Sika Spray (cartridges) and Sika Jetflow (unipacks) dispensers. Other dispensers need to be checked for suitability. Tooling and finishing Tooling and finishing must be carried out within the skin time of the product. It is recommended using Sika Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior the use. Removal Uncured Sikaflex-529 Evolution may be removed from tools and equipment with Sika Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Overpainting Sikaflex-529 Evolution can be best painted within the skin formation time. If painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika Aktivator-100 or Sika Aktivator-205 prior to paint process. If the paint requires a baking process (> 80 °C), best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.