Sika AnchorFix-3030, High Performance Epoxy Anchoring Adhesive, Interior & Exterior, Light grey

Category: Adhesives & Sealants

SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Packing
- 385 mL
- 585 mL

This combination does not exist.

Epoxy high performance chemical anchoring adhesive

Sika AnchorFix-3030 is an epoxy resin based, two-part, thixotropic, high performance anchoring adhesive for anchoring threaded rods and reinforcing bars in both cracked and uncracked dry or damp concrete.

Long open-time.
Can be used in damp concrete.
High load capacity.
ETA for anchoring in cracked concrete.
ETA for post installed rebar connections.
Seismic tested (C1 & C2).
Suitable for contact with drinking water.
Fire resistant.
Styrene-free.
Good adhesion to substrates.
Shrinkage-free hardening.
Low emissions.
Low wastage.

Usage

Anchoring adhesive for fixing of non-expanding anchors in the following:
Structural work

Rebar / steel reinforcement anchoring in new and refurbishment works
Threaded rods
Bolts and special fastening / fixing systems

Metalwork and carpentry

Handrails, balustrades and supports
Railings
Window and door frames

Substrates

Concrete (cracked and uncracked)
Hollow and solid masonry
Wood
Natural and reconstituted stone
Solid rock

Advantages

Long open-time.
Can be used in damp concrete.
High load capacity.
ETA for anchoring in cracked concrete.
ETA for post installed rebar connections.
Seismic tested (C1 & C2).
Suitable for contact with drinking water.
Fire resistant.
Styrene-free.
Good adhesion to substrates.
Shrinkage-free hardening.
Low emissions.
Low wastage.

Packaging

385 ml dual cartridge

12 cartridges per box

Pallet: 70 boxes with 840 cartridges

585 ml dual cartridge

12 cartridges per box

Pallet: 44 boxes with 528 cartridges

Refer to current price list for packaging variations.

Colour

Part A	Off white
Part B	Grey
A+B mixed	Light grey

Technical Information

Compressive Strength

~95 N/mm²(7 days, +20 °C)

(ASTM D 695)

Flexural Strength

~45 N/mm²(7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~23 N/mm²(7 days, +20 °C)

(ASTM D 638)

Service Temperature

Long term	-40 °C min. / +50 °C max.
Short term (1–2 hours)	+70 °C

Application Information

Mixing Ratio

Part A : Part B = 3 : 1 by volume

Layer Thickness

~8 mm maximum

Sag Flow

Non-sag, including overhead

Product Temperature

+10 °C minimum / +40 °C maximum

Ambient Air Temperature

+5 °C minimum / +40 °C maximum

Dew Point

Beware of condensation.
Substrate temperature during application must be at least +3 °C above dew point.

Substrate Temperature

+5 °C minimum / +40 °C maximum

Curing Time

Temperature	Open time - T_gel	Curing time - T_cur
+35 °C to +40 °C	6 minutes	2 hours
+30 °C to +35 °C	8 minutes	4 hours
+25 °C to +30 °C	12 minutes	6 hours
+20 °C to +25 °C	18 minutes	8 hours
+15 °C to +20 °C	25 minutes	12 hours
+10 °C to +15 °C	40 minutes	18 hours
+5 °C to +10 °C*	150 minutes	24 hours
+5 °C*	300 minutes	24 hours

* Minimum cartridge temperature: +10 °C

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.

Preview TDS

Download TDS

General Specifications
Packaging	385 mL
Usage	Anchoring Steel, Rods, Frames In Concrete/Masonry
Usage Area	Interior & Exterior
Color	Light grey
Chemical Base	Epoxy resin
Storage Conditions	+10 °C to +25 °C - Store in sealed, undamaged packaging in dry conditions. Refer to packaging for details.
Density	1.5 kg/L
Service Temperature	-40 >< +50
Application Time	10 - 15 min.
Curing Time	24 hours
Application Thickness	2 >< 3 mm
Application Method	Gun
UV Resistant	Yes
Moisture Resistant	Yes
Mold Resistant	No
Paintable	Yes
Sealant	Yes
Flexible	Yes

Epoxy high performance chemical anchoring adhesive

Long open-time.
Can be used in damp concrete.
High load capacity.
ETA for anchoring in cracked concrete.
ETA for post installed rebar connections.
Seismic tested (C1 & C2).
Suitable for contact with drinking water.
Fire resistant.
Styrene-free.
Good adhesion to substrates.
Shrinkage-free hardening.
Low emissions.
Low wastage.

Usage

Anchoring adhesive for fixing of non-expanding anchors in the following:
Structural work

Rebar / steel reinforcement anchoring in new and refurbishment works
Threaded rods
Bolts and special fastening / fixing systems

Metalwork and carpentry

Handrails, balustrades and supports
Railings
Window and door frames

Substrates

Concrete (cracked and uncracked)
Hollow and solid masonry
Wood
Natural and reconstituted stone
Solid rock

Advantages

Long open-time.
Can be used in damp concrete.
High load capacity.
ETA for anchoring in cracked concrete.
ETA for post installed rebar connections.
Seismic tested (C1 & C2).
Suitable for contact with drinking water.
Fire resistant.
Styrene-free.
Good adhesion to substrates.
Shrinkage-free hardening.
Low emissions.
Low wastage.

Packaging

385 ml dual cartridge

12 cartridges per box

Pallet: 70 boxes with 840 cartridges

585 ml dual cartridge

12 cartridges per box

Pallet: 44 boxes with 528 cartridges

Refer to current price list for packaging variations.

Colour

Part A	Off white
Part B	Grey
A+B mixed	Light grey

Technical Information

Compressive Strength

~95 N/mm²(7 days, +20 °C)

(ASTM D 695)

Flexural Strength

~45 N/mm²(7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~23 N/mm²(7 days, +20 °C)

(ASTM D 638)

Service Temperature

Long term	-40 °C min. / +50 °C max.
Short term (1–2 hours)	+70 °C

Application Information

Mixing Ratio

Part A : Part B = 3 : 1 by volume

Layer Thickness

~8 mm maximum

Sag Flow

Non-sag, including overhead

Product Temperature

+10 °C minimum / +40 °C maximum

Ambient Air Temperature

+5 °C minimum / +40 °C maximum

Dew Point

Beware of condensation.
Substrate temperature during application must be at least +3 °C above dew point.

Substrate Temperature

+5 °C minimum / +40 °C maximum

Curing Time

Temperature	Open time - T_gel	Curing time - T_cur
+35 °C to +40 °C	6 minutes	2 hours
+30 °C to +35 °C	8 minutes	4 hours
+25 °C to +30 °C	12 minutes	6 hours
+20 °C to +25 °C	18 minutes	8 hours
+15 °C to +20 °C	25 minutes	12 hours
+10 °C to +15 °C	40 minutes	18 hours
+5 °C to +10 °C*	150 minutes	24 hours
+5 °C*	300 minutes	24 hours

* Minimum cartridge temperature: +10 °C