SikaTack MOVE Transportation, Glass Replacement Adhesive for Buses, Exterior, Black, 600 mL
SikaTack MOVE Transportation, Glass Replacement Adhesive for Buses, Exterior, Black, 600 mL
Sika
SikaTack MOVE Transportation, Glass Replacement Adhesive for Buses, Exterior, Black, 600 mL
SikaTack MOVE Transportation, Glass Replacement Adhesive for Buses, Exterior, Black, 600 mL
0.00 €
without VAT
1.00 lei
| All-in-one solution for Bus and Coach Glass Replacement SikaTack MOVE Transportation is a cold-applied windshield adhesive specially designed for windshield replacement and gap filling in bus, truck and rail glass replacement. It provides a good weathering stability and is therefore suitable for open joints.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
PRODUCT BENEFITS
UsageSikaTack MOVE Transportation has been specially designed as an all-in-one solution for the windshield replacement of commercial vehicles such as buses and trucks. Thanks to its weathering stability it can be used for both bonding and gap filling. It is ideal for mobile and in-house installations.SikaTack MOVE Transportation is suitable for experienced users only. This product and related process information is designed for Automotive Glass Replacement. For other applications, tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Packaging
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Typical Product Data
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Technical Information CURE MECHANISM SikaTack MOVE Transportation cures by reaction with atmospheric moisture. At low temperatures the water content of the air is generally lower and the curing reaction proceeds somewhat slower (see diagram 1). Diagram 1: Curing speed of SikaTack MOVE Transportation CHEMICAL RESISTANCE SikaTack MOVE Transportation is generally resistant to fresh water, seawater, diluted acids and diluted caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids, glycolic alcohol, concentrated mineral acids and caustic solutions or solvents. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Application Information Surface Preparation Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Application It is recommended to apply SikaTack MOVE Transportation with a powerful battery operated application gun.
Figure 1: Compressing adhesive bead to final size
The open time is significantly shorter in hot and humid climates. The glass must always be installed within the open time. Never install a glass after the product has built up a skin. Removal Uncured SikaTack MOVE Transportation can be removed from tools and equipment with Sika Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on skin! |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.Once the user has seen at least one product this snippet will be visible.