Sika Icosit KC 330 Primer, 1-Part Pu Primer for Icosit Kc 330/340 Systems, Exterior, 3 L

Category: Primers, Paints & Pigments

SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Color
- Yellowish-Brown
- Transparent

This combination does not exist.

1-pack Polyurethane Primer for Icosit® KC 330 / 340 product range

Sika® Icosit® KC 330 Primer is a 1-pack, polyurethane ready to use, solvented, reaction-curing primer.

Highly abrasion resistant.
Good penetration and substrate stabilisation.
Moisture-curing.
Tough-hard.

Usage

Adhesion promoter as pre-treatment of dry concrete, steel and asphalt substrates. For improving adhesion of the Icosit® KC 330 / 340 range of products.

Advantages

Highly abrasion resistant.
Good penetration and substrate stabilisation.
Moisture-curing.
Tough-hard.

Packaging

3 Litre container

Colour

Yellowish-brown / transparent

Technical Information

Service Temperature

-40 °C min. / +80 °C max.

short term up to 150 °C

Thermal Resistance

Dry heat short-term up to ~+150 °C, liquids up to ~ +60 °C

Chemical Resistance

Long-term Resistant Against:

Water
Many detergent solutions
Seawater

Temporary Resistant Against:

Mineral oil, diesel fuel

Short-term or No Resistance Against:

Organic solvents (esters, ketones, aromates) and alcohol
Concentrated lyes and acids

Contact Sika® Technical Services for specific information.

Application Information

Product Temperature

Condition product before application preferably at ~+15 °C

Ambient Air Temperature

+5 °C min. / +35 °C max.

Relative Air Humidity

30 % min. / 70 % max.

Substrate Temperature

+5 °C min. / +35 °C max

Substrate Moisture Content

≤ 3 % parts by weight

+3 °C max. above dew point temperature

Pot Life

Contents of opened container should be used within the same day.

Waiting Time / Overcoating

At 40 % - 60 % relative humidity

	+10 °C	+20 °C	+30 °C
Minimum	3 hours	1 hour	1 hour
Maximum	3 days	3 days	3 days

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.

Preview TDS

Download TDS

General Specifications
Packaging	3 L
Chemical Base	1-pack polyurethane
Usage	Adhesion promoter for dry concrete, steel, and asphalt for Icosit use
Application Method	Brush or roller
Usage Area	Exterior
Color	Yellowish-brown
Service Temperature	+5 °C min. / +35 °C max.
Storage Conditions	The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10 °C and +25 °C. Always refer to packaging.
Density	~1,0 kg/l(ISO 2811-1)
Consumption	~ 0,1 kg/m² - 0,2 kg/m²