Curing and sealing compound for concrete floors
Sikafloor® ProSeal-12 is a solvent-based, clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete.
-
Improves the hardening of the concrete.
-
Improved abrasion resistance, dust prevention.
-
Excellent moisture retention.
-
It reduces substrate absorption and increases the resistance of oils.
-
Easy application by spray or roller.
-
Quick drying.
-
Cost-effective.
-
Available in different sized packaging for convenience.
|
Usage
Sikafloor® ProSeal-12 creates durable, wear-resistant and non-dusting surface to existing matured or fresh laid concrete floors or constructions.
- Suitable for protection against ingress (Principle 1, method 1.2 of EN 1504-9).
- Suitable for physical resistance (Principle 5, method 5.2 of EN 1504-9).
Advantages
- Improves the hardening of the concrete.
- Improved abrasion resistance, dust prevention.
- Excellent moisture retention.
- It reduces substrate absorption and increases the resistance of oils.
- Easy application by spray or roller.
- Quick drying.
- Cost-effective.
- Available in different sized packaging for convenience.
Packaging
Can: 5 l and 15 l Drum: 200 l
Colour
Transparent or slightly yellowish solution
|
Application Information
Ambient Air Temperature
Sikafloor® ProSeal-12 can be applied at a broad range of temperatures (-10°C to +35°C). Significant prolongation / reduction of the drying time is expected when applied at temperature limits.
Relative Air Humidity
80 % relative humidity maximum
Dew Point
Beware of condensation! The substrate and uncured floor must be at least +3°C above dew point to reduce the risk of condensation or blooming on the floor finish.
Waiting Time / Overcoating
The surface is touch dry after 1 to 2 hours at +20°C. Completely dry after 24 hours at +20°C.
|
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.