Sikafloor-3000, Two-Component Polyurethane Resin, 20Kg
SIKA
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more2-part elastic, aliphatic, low VOC, self-smoothing polyurethane resin, part of the Sika ComfortFloor® range. Sikafloor®-3000 is a two part, aliphatic, solvent free, very low VOC emission certified, elastic, self-smoothing polyurethane resin. | ||||||||||||||||||||||||||||||||||||
Advantages
Packaging
Colour
Available in Steely Glimpse, Amberish Grey, Brilliant Blue, Sea Mist, Sky Line, Spring Grass, Concrete Grey, Latte Macchiato, Light Ivory, Black, Frosty Tree, Sweet Citrus, Sunfire, Brown Beige, Bordeaux Wine. Note: With bright colours such as yellow , orange etc., colour variations may occur | ||||||||||||||||||||||||||||||||||||
Typical Product Data
| ||||||||||||||||||||||||||||||||||||
ApplicationMixing Ratio Part A : part B = 75 : 25 (by weight) Layer Thickness Sikafloor®-3000 is typically installed at 2,8 kg/m² giving a 2 mm (0.0787 in) nominal thickness. Product Temperature +15°C (+59 °F) min. / +30°C (+86 °F) max. Ambient Air Temperature +15°C (+59 °F) min. / +30°C (+86 °F) max. Relative Air Humidity 80% r.h. max. Dew Point Beware of condensation! The substrate and uncured floor must be at least 3°C (37 °F) above dew point to reduce the risk of condensation or blooming on the floor finish. Substrate Temperature +15°C (+59 °F) min. / +30°C (+86 °F) max. Substrate Moisture Content < 4% pbw moisture content. Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). Pot Life
Applied Product Ready for Use
Note: Times are approximate and will be affected by changing ambient conditions. Refer to the System Data Sheets of the Sikafloor®-PS24 system (Sika® Comfortfloor® Decorative) and Sikafloor®-PS26 system (Sika® Comfortfloor® Decorative Pro) for information on systems being ready for use. Consumption Please refer to the System Data Sheet MIXING Please refer to the Sika Method Statement Mixing & Application APPLICATION Please refer to the Sika Method Statement Mixing & Application Self-smoothing system 2.0 mm (0.0787 in): Sikafloor®-3000 is poured and spread evenly by means of a serrated trowel or pinrake. If desired broadcast slightly and evenly with Sikafloor® Colourchips. If during application locally some imperfections become visible, like pigment floatation, this local spot can be treated immediately with a spike roller to eliminate the imperfection. Tools for application:
TECHNO-Werkzeuge A.E; Vertriebs GmbH Dieselstr. 44; 42579 Heiligenhaus, Phone: 02056 / 9846-0, [email protected]; Homepage: http://www.techno-vertrieb.de PPW-Polyplan-Werkzeuge GmbH, Phone: +49 40/5597260, www.polyplan.com. CLEANING OF TOOLS Clean all tools and application equipment with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically. Please refer to the Sika Method Statement Mixing & Application |