Sika AnchorFix-1

Name: Sika AnchorFix-1
Brand: SIKA
SKU: PTG040.00064
Price: 186.00 RON
Availability: InStock

Category: Grouts

SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

Packing
- 300 mL
- 3Pack - 300 ml

This combination does not exist.

Fast curing anchorage adhesive

Solvent and styrene free based, two-component polyester anchoring adhesive. Suitable for use in hot and tropical climatic conditions.

Usage

As a fast curing anchoring adhesive for all grades of:

Rebars / reinforcing steel
Threaded rods
Bolts and special fastening systems
Concrete
Hollow and solid masonry
Hard natural stone*
Solid rock*

*These substrates may vary greatly, in particular with regard to the strength, composition and porosity. Thereforefor each application the suitability of Sika AnchorFix® -1 adhesive must be tested by applying a sample area. Checking particular bond strength, surface staining and discoloration.

Advantages

Fast curing
Standard guns can be used
Can be used at low temperatures
High load capacity
ETA Approval available
Non-sag, even overhead
Styrene-free
Low odour
Low wastage

Packaging

300 mL standard cartridge	12 cartridges per box
	pallet: 75 boxes

Colour

Component A:	white
Component B:	black
Component A+B mixed:	light grey

Stone colour:

Component A:	white
Component B:	salmon
Component A+B mixed:	beige

Typical Product Data

APPROVALS / CERTIFICATES		- Injection system for use in masonry according to ETAG 029, ETA-12/0227, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 0679, certificate of constancy of performance 0679-DPD-0777, and provided with the CE marking - Bonded injection type anchor for non cracked concrete according to ETAG 001 annex 1 and 5, ETA- 13/0720, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD-090-029816, and provided with the CE marking.
Shelf life		12 months from date of production All Sika AnchorFix®-1 cartridges have the expiry date printed on the label.
Storage conditions		Stored properly in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C (+41 °F) and +25 °C (+77 °F). Protect from direct sunlight.
Density		~1.63 kg/l (~13.6 lb/gal) (component A+B mixed)
System Structure		For details about adhesive anchoring design refer to the separate documentation provided: “Technical Documentation Sika AnchorFix®-1”
Compressive Strength		~60 N/mm 2 (~8702 psi) (7 days, +20 °C (+68 °F)) (ASTM D 695)
Modulus of Elasticity in Compression		~3 500 N/mm 2 (72519 psi) (7 days, +20 °C (+68 °F)) (ASTM D 695)
Tensile Strength in Flexure		~28 N/mm 2 (~4061 psi) (7 days, +20 °C (+68 °F)) (ASTM D 790)
Tensile Strength		~12 N/mm 2 (~1740 psi) (7 days, +20 °C (+68 °F)) (ASTM D 638)
Temperature Resistance		Long term +50 °C (+122 °F) Short term (1-2 hours) +80 °C (+176 °F)
Glass Transition Temperature		+60 °C (+140 °F) (DIN EN ISO 6721-1)

Application

Mixing Ratio

Component A : component B = 10 : 1 by volume

Layer Thickness

3 mm (0.118 in) max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix®-1 must be at a temperature of between +5 °C (+41 °F) and +40 °C (+104 °F) for application.

Ambient Air Temperature

–10 °C (50 °F) min. / +40 °C (+104 °F) max.

Dew Point

Beware of condensation. Substrate temperature during application must be at least 3 °C (37 °F) above dew point.

Substrate Temperature

–10 °C (50 °F) min. / +40 °C (+104 °F) max.

Curing Time

Temperature	Open time - T gel Curing time - T cur
+30 °C (+86 °F)	4 minutes 35 minutes
+25 °C (+77 °F) – +30 °C (+86 °F)	4 minutes 40 minutes
+20 °C (+68 °F) – +25 °C (+77 °F)	5 minutes 50 minutes
+10 °C (+50 °F) – +20 °C (+68 °F)	6 minutes 85 minutes
+5 °C (+41 °F) – +10 °C (+50 °F)	10 minutes 145 minutes
+5 °C (+41 °F)	18 minutes 145 minutes
–10 °C (50 °F) 1 2	30 minutes 24 hours

1 Minimum cartridge temperature +5 °C (+41 °F)

2 This application is not covered by the scope of the product ETA or any other approval.

SUBSTRATE QUALITY

Mortar and concrete must be at the required strength. No need to be 28 days old. Substrate strength (concrete, masonry, natural stone) must be verified. Pull-out tests must be carried out if the substrate strength is unknown. The anchor hole must always be clean, dry, free from oil and grease etc. Loose particles must be removed from the holes. Threaded rods and rebars have to be cleaned thoroughly from any oil, grease or any other substances and particles such as dirt etc.

MIXING

Getting the cartridge ready: 300 mL / 550 mL

	1. Unscrew the cap
	2. Cut the film
	3. Screw on the static mixer
	4. Place the cartridge into the gun and start application. When the work is interrupted the static mixer can remain on the cartridge after the gun pressure has been relieved. If the resin has hardened in the nozzle when work is resumed, a new nozzle must be attached.

CLEANING OF EQUIPMENT

Clean tools and application equipment with Sika® Colma Cleaner immediately after use. Hardened / cured material can only be mechanically removed.

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Preview TDS

Download TDS

General Specifications
Packaging	300 ml
Chemical Base	-
Usage	Fast anchoring adhesive: rebars, threaded rods, bolts; concrete, masonry
Usage Area	-
Color	A+B mixed: light grey / beige (stone colour)
Working Time	-
Product Temperature	Sika AnchorFix®-1 must be at a temperature of between +5 °C and +40 °C for application
Application Thickness	-
Ambient Air Temperature	–10 °C min. / +40 °C max
Storage Conditions	+5…+25 °C, dry, original packaging; away from sunlight
Density	~1.63 kg/l (component A+B mixed)

Fast curing anchorage adhesive

Solvent and styrene free based, two-component polyester anchoring adhesive. Suitable for use in hot and tropical climatic conditions.

Usage

As a fast curing anchoring adhesive for all grades of:

Rebars / reinforcing steel
Threaded rods
Bolts and special fastening systems
Concrete
Hollow and solid masonry
Hard natural stone*
Solid rock*

Advantages

Fast curing
Standard guns can be used
Can be used at low temperatures
High load capacity
ETA Approval available
Non-sag, even overhead
Styrene-free
Low odour
Low wastage

Packaging

300 mL standard cartridge	12 cartridges per box
	pallet: 75 boxes

Colour

Component A:	white
Component B:	black
Component A+B mixed:	light grey

Stone colour:

Component A:	white
Component B:	salmon
Component A+B mixed:	beige

Typical Product Data

APPROVALS / CERTIFICATES		- Injection system for use in masonry according to ETAG 029, ETA-12/0227, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 0679, certificate of constancy of performance 0679-DPD-0777, and provided with the CE marking - Bonded injection type anchor for non cracked concrete according to ETAG 001 annex 1 and 5, ETA- 13/0720, Declaration of Performance 020403010010000001 5034408, certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD-090-029816, and provided with the CE marking.
Shelf life		12 months from date of production All Sika AnchorFix®-1 cartridges have the expiry date printed on the label.
Storage conditions		Stored properly in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C (+41 °F) and +25 °C (+77 °F). Protect from direct sunlight.
Density		~1.63 kg/l (~13.6 lb/gal) (component A+B mixed)
System Structure		For details about adhesive anchoring design refer to the separate documentation provided: “Technical Documentation Sika AnchorFix®-1”
Compressive Strength		~60 N/mm 2 (~8702 psi) (7 days, +20 °C (+68 °F)) (ASTM D 695)
Modulus of Elasticity in Compression		~3 500 N/mm 2 (72519 psi) (7 days, +20 °C (+68 °F)) (ASTM D 695)
Tensile Strength in Flexure		~28 N/mm 2 (~4061 psi) (7 days, +20 °C (+68 °F)) (ASTM D 790)
Tensile Strength		~12 N/mm 2 (~1740 psi) (7 days, +20 °C (+68 °F)) (ASTM D 638)
Temperature Resistance		Long term +50 °C (+122 °F) Short term (1-2 hours) +80 °C (+176 °F)
Glass Transition Temperature		+60 °C (+140 °F) (DIN EN ISO 6721-1)

Application

Mixing Ratio

Component A : component B = 10 : 1 by volume

Layer Thickness

3 mm (0.118 in) max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix®-1 must be at a temperature of between +5 °C (+41 °F) and +40 °C (+104 °F) for application.

Ambient Air Temperature

–10 °C (50 °F) min. / +40 °C (+104 °F) max.

Dew Point

Beware of condensation. Substrate temperature during application must be at least 3 °C (37 °F) above dew point.

Substrate Temperature

–10 °C (50 °F) min. / +40 °C (+104 °F) max.

Curing Time

Temperature	Open time - T gel Curing time - T cur
+30 °C (+86 °F)	4 minutes 35 minutes
+25 °C (+77 °F) – +30 °C (+86 °F)	4 minutes 40 minutes
+20 °C (+68 °F) – +25 °C (+77 °F)	5 minutes 50 minutes
+10 °C (+50 °F) – +20 °C (+68 °F)	6 minutes 85 minutes
+5 °C (+41 °F) – +10 °C (+50 °F)	10 minutes 145 minutes
+5 °C (+41 °F)	18 minutes 145 minutes
–10 °C (50 °F) 1 2	30 minutes 24 hours

1 Minimum cartridge temperature +5 °C (+41 °F)

2 This application is not covered by the scope of the product ETA or any other approval.

SUBSTRATE QUALITY

MIXING

Getting the cartridge ready: 300 mL / 550 mL

	1. Unscrew the cap
	2. Cut the film
	3. Screw on the static mixer
	4. Place the cartridge into the gun and start application. When the work is interrupted the static mixer can remain on the cartridge after the gun pressure has been relieved. If the resin has hardened in the nozzle when work is resumed, a new nozzle must be attached.

CLEANING OF EQUIPMENT

Clean tools and application equipment with Sika® Colma Cleaner immediately after use. Hardened / cured material can only be mechanically removed.

Sika AnchorFix-1

SIKA

225.06 lei Tax Included
225.06 RON

Not Available For Sale

Usage

Advantages

Packaging

Colour

Typical Product Data

Application

Usage

Advantages

Packaging

Colour

Typical Product Data

Application

Sika AnchorFix-1

SIKA

225.06 lei Tax Included 225.06 RON

Not Available For Sale

Usage

Advantages

Packaging

Colour

Typical Product Data

Application

Usage

Advantages

Packaging

Colour

Typical Product Data

Application

225.06 lei Tax Included
225.06 RON