Self-smoothing visco-elastic damping mortar for interior decks Sikafloor® Marine VEM is a 1-component damping, self-smoothing mortar based on polymer modified cement. It is specifically designed to be used in combination with Sikafloor® Marine-18, -118 FC or -190 mortars to reduce low frequency structure borne noise. Sikafloor® Marine VEM is tested according to FTP Code system and approved according to the IMO Marine Equipment Directives. - Visco-elastic mortar
- Isocyanate free
- High damping factor
- Can be pumped
- One component, ready to mix
- Environmental friendly
|
PRODUCT BENEFITS - Visco-elastic mortar
- Isocyanate free
- High damping factor
- Can be pumped
- One component, ready to mix
- Environmental friendly
Usage Sikafloor® Marine VEM is applied on interior decks in combination with Sikafloor® Marine-18, -118 FC and -190 mortars. It is suitable for application in dry and wet areas. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. |
Typical Product Data| Chemical base | | Polymer modified cement | | Colour | | Grey | | Cure mechanism | | Hydraulic | | Density | mixedcured | 1.5 kg/l 1.3 kg/l | | Mixing ratio | per 16 kg bag | 5.3 ─ 5.8 litres | | Substrate temperature | | 5 ─ 30 °C | | Application thickness | max. | 2 mm | | Coverage | per 16 kg bag at layer thickness 2 mm | 6 m2 | | Working time (CQP599-9) | | 30 minutes A | | Ready to walk on (CQP600-3) | depending on humidity and ventilation | 12 hours A | | Tensile strength (CQP036-2) | | 0.6 MPa B | | Elongation at break (CQP036-2) | | 55 % B | | Shore A (CQP023-1) | | 75 B | | Shelf life | | 12 months C |
|
Technical Information CURE MECHANISM Sikafloor® Marine VEM cures by way of hydraulic curing.
|
Application Information Surface Preparation For applications, the surface has to be clean, free from dust, grease, oils and other substances, which may impair adhesion. Rust has to be removed with a steel brush or other appropriate means, followed by vacuum cleaning.
The surface has to be primed with Sikafloor® Marine Primer C using a long hair roller. After drying of the Sikafloor® Marine Primer C, Sikafloor® Marine VEM may be applied.
Sikafloor® Marine VEM applications on aluminum or zinc rich shop primer coated decks, require a tie coat of SikaCor® ZP Primer or another suitable tie coat prior the priming step with Sikafloor® Marine Primer C. Application Apply the mortar with an appropiate notched trowel in order to get a layer thickness of 1.5 ─ 2 mm. Sikafloor® Marine VEM has to be applied within 30 minutes after mixing. At temperatures above 30 °C the open time will be reduced to 10 minutes or less. For advice on selecting and setting up a suitable pump system, contact the System Engineering Department of Sika Industry. Curing After application, the finished areas have to be protected against direct heat (e.g. cutting or welding from beneath), sunlight and draught during the curing process for at least 12 hours. Removal Excess material can best be removed before curing with a trowel wipe or water.
Fresh Sikafloor® Marine VEM may be removed from tools and equipment with water. Once cured, the material can only be removed mechanically.
Exposed hands and skin shall be washed immediately with water. Use a suitable skin protection hand cream. Application Limits For applications on slooping surfaces > 1 % contact the Technical Department of Sika Industry. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
