Chat
Shop
Sign in
0 Wishlist

Sikafloor Marine Litosilo X, Floating floor for A60 marine decks, Interior, Grey, 20 kg

Product Code: PTG041.00020
Share

Sikafloor Marine Litosilo X, Floating floor for A60 marine decks, Interior, Grey, 20 kg

Product Code: PTG041.00020
Share
Sika
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more

Sikafloor Marine Litosilo X, Floating floor for A60 marine decks, Interior, Grey, 20 kg

This combination does not exist.

Add to RFQ RFQ
    Product Image
    Sikafloor Marine Litosilo X, Floating floor for A60 marine decks, Interior, Grey, 20 kg

    0.00 € without VAT 0.0 EUR

    1.00 lei

    Add to Cart

    Floating floor for interior decks suitable for A 60 divisions and acoustic solutions

    Sikafloor® Marine Litosilo X is a 1-component medium weight high strength leveling mortar based on polymer modified cement with excellent flame resistance. Sikafloor® Marine Litosilo X is tested according to FTP Code system and approved according to the IMO Marine Equipment Directives.  

    • Approved as A-60 class division with Isover and Rockwool
    • Fast setting
    • Magnesium chloride free
    • Non combustible
    • Can be pumped (fast setting needs to be considered)
    • One component, ready to mix
    PRODUCT BENEFITS
    • Approved as A-60 class division with Isover and Rockwool
    • Fast setting
    • Magnesium chloride free
    • Non combustible
    • Can be pumped (fast setting needs to be considered)
    • One component, ready to mix
     
    Usage
    Sikafloor® Marine Litosilo X is applied on interior decks, as primary deck covering or as sound reducing floating floor prior to the application of deck finishing materials such as: carpets, tiles, parquet, rubber and vinyl. There are various combinations with Sikafloor® Marine Litosilo X to achieve an A 60 division and combined with insulation and a Sika visco-elastic system it can in addition be used to damp structure borne noise. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  
    Packaging

    Bag

    20 kg
    Typical Product Data
    Chemical base

    Polymer modified cement mortar

    Colour

    Grey

    Cure mechanism

    Hydraulic

    Densitymixedcured

    1.5 kg/l

    1.3 kg/l

    Mixing ratioper 20 kg bag

    4 ─ 4.6 liters

    Substrate temperature

    5 ─ 35 °C

    Application thicknesslevelingfloating floor

    6 ─ 100 mm

    25 ─ 100 mm

    Coverageper 20 kg bag at layer thickness 1 mm

    13 m2

    Working time (CQP599-9)

    20 minutes A

    Ready to walk on (CQP600-3)depending on humidity and ventilation

    3 hours A

    Compressive strength (CQP599-2)after 24 hours

    35 MPa B

    25 MPa B

    Flexural strength (CQP599-1)

    6 MPa B

    Modulus of elasticity in compression (CQP599-6 / EN 13412)

    13 GPa B

    Linear shrinkage (CQP599-5)

    0.016 % B

    Shelf life

    12 months C

    Technical Information
    CURE MECHANISM

    Sikafloor® Marine Litosilo X cures by way of hydraulic curing.
    Application Information
    Surface Preparation

    For leveling applications, the surface has to be clean, free from dust, grease, oils and other substances, which may impair adhesion. Rust has to be removed with a steel brush or other appropriate means, followed by vacuum cleaning.

    The surface has to be primed with Sikafloor® Marine Primer C using a long hair roller. After drying of the Sikafloor® Marine Primer C, Sikafloor® Marine Litosilo X may be applied. Sikafloor® Marine Litosilo X applications on aluminum or zinc rich shop primer coated decks, require a tie coat of SikaCor® ZP Primer or another suitable tie coat prior the priming step with Sikafloor® Marine Primer C.

    For floating floors, the mineral wool has to be sound (not damaged), clean, dry free from grease, oils and other substances.
    It’s a must to use re-enforcement such as wire mesh or similar for the whole area and extra re-enforcement (e.g. steel plates) where ever a higher load is expected such as in both sides of doors areas, staircases, etc.

    Further details for floating floors consult the Application Manual of Sikafloor® Marine Litosilo X and its approved combinations.

    Consider that prior applications of vinyl and carpet coverings, a thin self levelling mortar such as Sikafloor® Marine 100 has to be applied to obtain an even floor. For wet areas the surface has to be treated with a water resistant membrane (e.g. Sikafloor® Marine Elastic).
    Application

    Apply the mortar with a steel board or a straight edge.

    Sikafloor® Marine Litosilo X has to be applied within 30 minutes after mixing. At temperatures above 30 °C the open time will be reduced to 10 minutes or less.

    For advice on selecting and setting up a suitable pump system, contact the System Engineering Department of Sika Industry.
    Curing

    After application, the finished areas have to be protected against direct heat (e.g. cutting or welding from beneath), sunlight and draught during the curing process for at least 12 hours.
    Before Sikafloor® Marine Litosilo X is covered with dense materials such as vinyl, epoxy or polyurethane coatings, etc., ensure that the remaining moisture level is below 4 %.
    Test procedure to determine the dryness (according ASTM D 4263): put a PE-plastic foil 1 m x 1 m on the surface of the applied mortar floor, tape the perimeter and leave for one day. The curing is complete if there is no water condensation on the foil or a visible color difference between covered and uncovered surface.
    Removal

    Excess material can best be removed before curing with a trowel wipe or water.

    Fresh Sikafloor® Marine Litosilo X may be removed from tools and equipment with water. Once cured, the material can only be removed mechanically.

    Exposed hands and skin shall be washed immediately with water. Use a suitable skin protection hand cream.

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Preview TDS
    Download TDS
    General Specifications
    Packaging 20 kg
    Chemical Base Polymer modified cement mortar
    Usage Used as a primary or floating floor with sound/fire insulation. Professional use only
    Usage Area Interior
    Color Grey
    Working Time 20 minutes
    Application Thickness 6 mm >< 100 mm
    Ambient Air Temperature N/A
    Storage Conditions N/A
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products