Sika AnchorFix-2+, Styrene-Free Anchoring Adhesive, Interior & Exterior, Grey, 300 mL

Category: Adhesives & Sealants

SIKA

Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.

This combination does not exist.

Styrene-free anchoring adhesive for medium to high loads

Solvent and styrene-free, epoxy acrylate based, 2-component anchoring adhesive for normal / moderate climate conditions.

Fast curing.
Standard guns can be used for application.
High load capacity.
ETA to ETAG 001 for anchoring in concrete.
ETA to ETAG 001 for rebar connections.
Suitable for cracked concrete.
Drinking Water certified.
LEED Attestation available.
Non-sag, even overhead.
Styrene-free.
Low odour.
Low wastage.
Suitable in wet / damp (but clean) holes.
Appropriate for marine enviroments.

Usage

As a fast curing anchoring adhesive for all grades of:

Rebars / reinforcing steel
Threaded rods
Bolts and special fastening systems
Concrete (cracked and non-cracked)
Solid masonry
Steel
Hard natural stone*
Solid rock*

* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix-2+ Adhesive must be tested by first applying the product to a sample area. In particular, check bond strength, surface staining and discoloration.

Advantages

Fast curing.
Standard guns can be used for application.
High load capacity.
ETA to ETAG 001 for anchoring in concrete.
ETA to ETAG 001 for rebar connections.
Suitable for cracked concrete.
Drinking Water certified.
LEED Attestation available.
Non-sag, even overhead.
Styrene-free.
Low odour.
Low wastage.
Suitable in wet / damp (but clean) holes.
Appropriate for marine enviroments.

Packaging

300 ml standard cartridge	12 cartridges per box
	1 pallet: 75 boxes

Colour

Component A: white
Component B: black
Component A+B mixed: grey

Technical Information

Compressive Strength

~70 N/mm²(7 days, +20 °C)

(ASTM D 695)

Modulus of Elasticity in Compression

~7 000 N/mm²(7 days, +20 °C)

(ASTM D 695)

Flexural Strength

~29 N/mm²(7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~15 N/mm²(7 days, +20 °C)

(ASTM D 638)

Service Temperature

Long term	-40 °C min. / +50 °C max
Short term (1–2 hours)	+80 °C

Application Information

Mixing Ratio

Component A : Component B = 10 : 1 by volume

Layer Thickness

~5 mm max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix-2+ must be at a temperature of between +5 °C and +30 °C for application.

Ambient Air Temperature

+5 °C min. / +30 °C max.

Dew Point

Beware of condensation.
Substrate temperature during application must be at least 3 °C above dew point.

Substrate Temperature

+5 °C min. / +30 °C max.

Curing Time

Temperature	Open time - T_gel	Curing time - T_cur
+25 °C to +30 °C	4 minutes	40 minutes
+20 °C to +25 °C	5 minutes	50 minutes
+15 °C to +20 °C	6 minutes	75 minutes
+10 °C to +15 °C	8 minutes	85 minutes
+5 °C to +10 °C*	10 minutes	145 minutes

*Minimum cartridge temperature = +5 °C

The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

Contact our sales team for other specifications or custom made products.

Preview TDS

Download TDS

General Specifications
Packaging	300 mL
Usage	Fast-Curing Anchoring Adhesive For Rods, Bolts, Concrete, Masonry
Usage Area	Interior & Exterior
Color	Grey
Chemical Base	N/A
Storage Conditions	+5 °C to +25 °C - Store in sealed, undamaged packaging in dry conditions, protected from sunlight.
Density	1.60 - 1.68 kg/L
Service Temperature	-40 >< +50
Application Time	10 - 15 min.
Curing Time	24 hours
Application Thickness	2 >< 3 mm
Application Method	Gun
UV Resistant	Yes
Moisture Resistant	Yes
Mold Resistant	No
Paintable	Yes
Sealant	Yes
Flexible	Yes

Styrene-free anchoring adhesive for medium to high loads

Solvent and styrene-free, epoxy acrylate based, 2-component anchoring adhesive for normal / moderate climate conditions.

Fast curing.
Standard guns can be used for application.
High load capacity.
ETA to ETAG 001 for anchoring in concrete.
ETA to ETAG 001 for rebar connections.
Suitable for cracked concrete.
Drinking Water certified.
LEED Attestation available.
Non-sag, even overhead.
Styrene-free.
Low odour.
Low wastage.
Suitable in wet / damp (but clean) holes.
Appropriate for marine enviroments.

Usage

As a fast curing anchoring adhesive for all grades of:

Rebars / reinforcing steel
Threaded rods
Bolts and special fastening systems
Concrete (cracked and non-cracked)
Solid masonry
Steel
Hard natural stone*
Solid rock*

Advantages

Fast curing.
Standard guns can be used for application.
High load capacity.
ETA to ETAG 001 for anchoring in concrete.
ETA to ETAG 001 for rebar connections.
Suitable for cracked concrete.
Drinking Water certified.
LEED Attestation available.
Non-sag, even overhead.
Styrene-free.
Low odour.
Low wastage.
Suitable in wet / damp (but clean) holes.
Appropriate for marine enviroments.

Packaging

300 ml standard cartridge	12 cartridges per box
	1 pallet: 75 boxes

Colour

Component A: white
Component B: black
Component A+B mixed: grey

Technical Information

Compressive Strength

~70 N/mm²(7 days, +20 °C)

(ASTM D 695)

Modulus of Elasticity in Compression

~7 000 N/mm²(7 days, +20 °C)

(ASTM D 695)

Flexural Strength

~29 N/mm²(7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~15 N/mm²(7 days, +20 °C)

(ASTM D 638)

Service Temperature

Long term	-40 °C min. / +50 °C max
Short term (1–2 hours)	+80 °C

Application Information

Mixing Ratio

Component A : Component B = 10 : 1 by volume

Layer Thickness

~5 mm max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix-2+ must be at a temperature of between +5 °C and +30 °C for application.

Ambient Air Temperature

+5 °C min. / +30 °C max.

Dew Point

Beware of condensation.
Substrate temperature during application must be at least 3 °C above dew point.

Substrate Temperature

+5 °C min. / +30 °C max.

Curing Time

Temperature	Open time - T_gel	Curing time - T_cur
+25 °C to +30 °C	4 minutes	40 minutes
+20 °C to +25 °C	5 minutes	50 minutes
+15 °C to +20 °C	6 minutes	75 minutes
+10 °C to +15 °C	8 minutes	85 minutes
+5 °C to +10 °C*	10 minutes	145 minutes

*Minimum cartridge temperature = +5 °C