Chat
Shop
Sign in
0 Wishlist
  • Products
  • Sikafloor Comfort Adhesive, 2-Part PUR Adhesive for ComfortFloor® Systems, Interior, Light Grey, 20 kg

Sikafloor Comfort Adhesive, 2-Part PUR Adhesive for ComfortFloor® Systems, Interior, Light Grey, 20 kg

Product Code: PTG254.00468
Share

Sikafloor Comfort Adhesive, 2-Part PUR Adhesive for ComfortFloor® Systems, Interior, Light Grey, 20 kg

Product Code: PTG254.00468
Share
Sika
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read more

Sikafloor Comfort Adhesive, 2-Part PUR Adhesive for ComfortFloor® Systems, Interior, Light Grey, 20 kg

This combination does not exist.

Add to RFQ RFQ
    Product Image
    Sikafloor Comfort Adhesive, 2-Part PUR Adhesive for ComfortFloor® Systems, Interior, Light Grey, 20 kg

    0.00 € without VAT 0.0 EUR

    1.00 lei

    Add to Cart

    2-PART PUR PART OF THE SIKA-COMFORTFLOOR FLOORING RANGE

    Sikafloor-Comfort Adhesive is a two-part, total solid, low VOC, PUR used to adhere Sikafloor-Comfort Regupol 6015H and Sikafloor-Comfort Regupol 4580.

    • Good bonding properties
    • Low VOC
    • Non flammable
    • No shrinking after curing
    • Easy to apply
    Usage
    • Durable high quality adhesive, used to permanently adhere prefabricated granular rubber on concrete and cementitious screeds.
    • Particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan offices, museums or residential use.
    • For interior use only.
     
    Advantages
    • Good bonding properties
    • Low VOC
    • Non flammable
    • No shrinking after curing
    • Easy to apply
    Packaging

    Part A:

    17 kg containers

    Part B:

    3 kg containers

    Part A+B:

    20.0 kg ready to mix units
    Colour

    Resin - part A:

    light grey, liquid

    Hardener - part B:

    brown, transparent, liquid
    Technical Information
    Tensile Strength

    ~ 9.0 N/mm² (14 days / +23°C)

    (DIN 53504)

    Tensile adhesion strength

    > 1.5 N/mm2 (failure in concrete)

    (EN 13892-8)
    Application Information
    Mixing Ratio

    Part A : part B = 85 : 15 (by weight)
    Ambient Air Temperature

    +10°C min. / +30°C max.
    Relative Air Humidity

    80% r.h. max.
    Dew Point

    Beware of condensation!
    The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation or blooming on the floor finish.
    Substrate Temperature

    +10°C min. / +30°C max.
    Substrate Moisture Content

    < 3% pbw moisture content.
    Test method: Sika-Tramex meter, CM - measurement or Oven-dry-method.
    No rising moisture according to ASTM (Polyethylene-sheet).
    Pot Life

    Temperatures

    Time

    +10°C

    ~ 60minutes

    +20°C

    ~ 45 minutes

    +30°C~ 30 minutes
    Curing Time

    Before overcoating Sikafloor -Comfort Adhesive allow:

    Substrate temperature

    Minimum

    Maximum

    +10°C

    180 min

    360 min

    +20°C

    90 min

    180 min

    +30°C

    60 min

    90 min

    Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
    Applied Product Ready for Use

    Substrate temperature

    Foot traffic

    Full cure

    +10°C

    12 hours

    60 hours

    +20°C

    8 hours

    36 hours

    +30°C

    6 hours

    24 hours

    Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

     

    The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.

    Contact our sales team for other specifications or custom made products.
    Preview TDS
    Download TDS
    General Specifications
    Packaging 20 kg
    Usage Bonding Rubber Flooring In Hospitals, Schools, Offices
    Usage Area Interior
    Color Light Grey
    Chemical Base PUR
    Storage Conditions +5 °C to +30 °C - Store in original, unopened, undamaged sealed packaging in dry conditions.
    Density Mixed resin~ 1.30 kg/L All Density values at +23°C
    Service Temperature N/A
    Application Time 15 - 30 min.
    Curing Time 24 - 48 hours
    Application Thickness N/A
    Application Method Trowel or roller
    UV Resistant No
    Moisture Resistant Yes
    Mold Resistant No
    Paintable No
    Sealant No
    Flexible No
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products