Dimpled drainage and protection sheet with integral filtration layer Sika® Drain-850 Geo is a high density polyethylene (HDPE), heavy duty drainage and protection sheet with 10 mm high dimples on the bottom layer and a bonded geotextile (PP) filtration layer on the top layer. - High drainage capacity
- High mechanical/impact resistance
- Integral filtration layer
- Resistant to natural aggressive substances in ground water and soil
- Suitable for contact with soft water (aggressive to concrete)
- Can be installed on damp and wet substrates
- Forms a drainage channel in the space between the structural elements and the backfilling/soil/substrate to allow water to be drained away
|
Usage As a protection and drainage sheet for: - Preformed sheet and liquid applied membrane waterproofing systems
- Sika® White Box concept for waterproofing retaining walls and heavy duty use roofs/podiums
Advantages - High drainage capacity
- High mechanical/impact resistance
- Integral filtration layer
- Resistant to natural aggressive substances in ground water and soil
- Suitable for contact with soft water (aggressive to concrete)
- Can be installed on damp and wet substrates
- Forms a drainage channel in the space between the structural elements and the backfilling/soil/substrate to allow water to be drained away
Packaging Roll size | | Length | ~12,50 m | Width | ~2,44 m |
Refer to current price list for packaging variations Colour Top layer | Bonded filtration geotextile / White | Bottom layer | HDPE sheet with 10 mm deep dimples / Brown or black |
 |
Technical Information Resistance to Static Puncture 1,6 (-0,32) kN (geotextile) | (EN ISO 12236) |
Tensile Strength Machine direction | 12 (-2) kN/m | Cross machine direction | 10 (-2) kN/m |
Elongation Machine direction | 50 (±20) % | Cross machine direction | 50 (±20) % |
Ambient Maximum Temperature of Liquids +32 °C (water) Drain flow capacity Horizontal application* | (S/R, i= 0,04) | 0,60 (-20 %) l/(m·s) | Vertical application* | (S/R, i= 1) | 3,5 (-20 %) l/(m·s) |
*Values at at 20 kPa pressure Resistance to dynamic perforation 32 (+6) mm (geotextile, cone drop test) | (EN ISO 13433) |
Compression resistance 400 (± 20 %) kPa Water flow capacity 110 (-33) l/(m2·s) | (EN ISO 11058) |
|
Application Information Ambient Air Temperature -10 °C min. / +55 °C max. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.