A READY TO USE, ALL WEATHER ROOFING SYSTEM Everbuild® Liquid Roof is a fast-curing, polyurethane based waterproofing liquid membrane for flat and pitched roofs. Everbuild® Liquid Roof has excellent adhesion to both porous and non-porous substrates and is suitable for use on new projects, extensions or to refurbish an existing, leaky roof. The product has a moisture activated curing system that allows the product to use atmospheric moisture to trigger the curing process, which means that no catalyst is needed and the product is fast curing.
With a 2 coat application to a variety of substrates this fast curing membrane cures in a range of weather conditions (see limitations) and is completely rain resistant in just 10 minutes. - Suitable for use with both new and old roofs.
- Moisture curing technology –no catalyst required.
- Fast curing – rain resistant after 10 minutes.
- All weather product.
- Ready to use – apply with brush or roller.
- Forms a seamless membrane.
- Can be reinforced.
- Easily recoated, no stripping required.
- Provides cost effective life-cycle extension of failing roofs.
- Vapour permeable – allows substrate to breathe.
- Elastic – retains flexibility even at low temperatures.
- Compatible with common substrates: Cement, concrete, brick, stone, metals, wood, tiles etc.
|
Usage - Water-proofing of flat and pitched roof structures.
- Treatment of new construction and refurbishment of existing structures.
- Ideal for use on concrete, mortar, brick, stone, fibre cement, roof tiles, metals, wood and tiles. Can also be used on roofing felt, asphalt and bituminous coatings however full reinforcement must be used with these surfaces as they may soften after application. Reinforce using a suitable reinforcing fleece.
- For waterproofing underneath tiles bonded with adhesives on balconies and terraces.
Advantages - Suitable for use with both new and old roofs.
- Moisture curing technology –no catalyst required.
- Fast curing – rain resistant after 10 minutes.
- All weather product.
- Ready to use – apply with brush or roller.
- Forms a seamless membrane.
- Can be reinforced.
- Easily recoated, no stripping required.
- Provides cost effective life-cycle extension of failing roofs.
- Vapour permeable – allows substrate to breathe.
- Elastic – retains flexibility even at low temperatures.
- Compatible with common substrates: Cement, concrete, brick, stone, metals, wood, tiles etc.
Tensile Load 370 N reinforced Categorised by working lifeW2Categorised by climate zoneM and SCategorised by slopeS1 - S4Categorised by imposed loads (hard substrate only)P4Categorised by surface temp.Lowest TL3. Highest TH3.Water vapour diffusion (Sd)3.47 mResistance to wind loads>50 kPaElongation at break ~180 % unreinforced ~150 % unreinforced, after heat aging ~50 % reinforced (ISO 527-3) Packaging 7 kg and 21 kg metal tins. |
Technical Information Tensile Strength ~4.5 N/mm2 unreinforced ~8 N/mm2 reinforced (ISO 527-3)
External Fire Performance Broof (t1)
Reaction to Fire Euroclass E
|
Application Information Ambient Air Temperature Ambient temperature must be between +5 °C and +40 °C and maximum 85 % relative humidity.
Beware of condensation as it may affect adhesion and appearance. Substrate Temperature Substrate temperature must be between +5 °C and +60 °C. Moisture content of substrate must be ≤4 %. |
The above design is only a sample of the options available, for reference purposes only. Our policy of continuous improvement may result in a change of specifications without notice. If any discrepencies might be between the data sheet values and standards, we reserve the rights to make technical changes. Our company will not be held responsible, as all or any of pictures, drawings, weights and dimensions details or other elements in this document are only indicative and must not be considered contractual. Contact our sales team for other specifications or custom made products.
Contact our sales team for other specifications or custom made products.
