Sikalastic PVC Primer, 1L
SIKA
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read moreSikalastic® Primer PVC is a one-component, red polyurethane primer for consistent and durable adhesion between Sikaplan® PVC roofing membranes and Sika® Liquid Applied Membrane (LAM) roofing systems | ||||||||||||||||||
UsageSikalastic® Primer PVC is a primer to improve adhesion to PVC single-ply membranes. It is suitable for use in conjunction with Sika liquid detailing kits incorporating the specified polyurethane membrane. Sikalastic® Primer PVC may also be used in full refurbishment applications, subject to adhesion test results. Advantages
Packaging1000 ml aluminium bottles, 4 aluminium bottles per box ColourRed | ||||||||||||||||||
Typical Product Data
| ||||||||||||||||||
ApplicationAmbient Air Temperature +5 °C (+41 °F) min. / +35 °C (+95 °F) max. Dew Point Beware of condensation. The substrate and uncured material must be ≥3 °C (37 °F) above dew point. Substrate Temperature +5 °C (+41 °F) min. / +35 °C (+95 °F) max. Substrate Moisture Content Visibly free from moisture and condensation Waiting Time / Overcoating 30 minutes to 24 hours (may vary due to weather conditions) Consumption 70 - 100 ml/m 2 SUBSTRATE QUALITY The surfaces must be clean, dry, free of stripping agents and free of oil, grease, silanes, salts, silicone, siloxanes and other chemicals which could cause poor adhesion. SUBSTRATE PREPARATION All surfaces to be coated should be thoroughly cleaned by conventional means. Prior to the application of the Sikalastic® Primer PVC clean with Sarna Cleaner or Sika-Trocal Cleaner L100 and allow surface to dry for a minimum of 15 minutes at 23 °C (73 °F) and 50 % relative humidity. Depending on climate, curing can be faster or slower. For detailed information regarding substrate quality / preparation and primer chart please refer to Method Statement. APPLICATION Shake the can of Sikalastic® Primer PVC prior to application. Apply a thin but completely covering coat of Sikalastic® Primer PVC with a solvent resistant brush or felt pad. Sikalastic® Primer PVC shall be applied once only. Care must be taken to ensure that this single application gives adequate and uniform coverage. Allow primer to dry sufficiently (see table waiting time / overcoating) before overcoating. For detailed information about detailing on PVC/TPO membranes, please refer to Method Statement. CLEANING OF TOOLS Clean all tools and application equipment with Thinner C immediately after use. |