Solvent T 660, Thinner for Sarnacol T660
SIKA
Sika is a global leader in specialty chemicals for the construction and industrial sectors. The company develops and supplies innovative products and systems for bonding, sealing, damping, reinforcing, and protecting structures. With a strong focus on sustainability and performance, Sika serves a wide range of applications including concrete production, waterproofing, roofing, flooring, and structural strengthening.
Read moreThinner for Sarnacol® T 660 adhesive Mixture of highly volatile solvents | |||||||||||||||||||||
UseSolvent T-660 is used to dilute Sarnacol® T-660 adhesive and to remove dirt from the surfaces of Sarnafil® T and Sikaplan® T (FPO) membranes. It is also used to clean tools and degrease metal surfaces. Careful! Solvent T-660 is not recommended for surface preparation of Sarnafil® T and Sikaplan® T membranes before heat welding. Advantages
pack
Colortransparent | |||||||||||||||||||||
Typical technical data
| |||||||||||||||||||||
ApplicationAmbient air temperature Up to -30 °C (86 °F) Support temperature Up to -20 °C (68 °F) APPLICATION Application instructions: Based on the valid installation instructions of the waterproofing membrane used. Method of application: Application as a thinner for Sarnacol® T 660 adhesive: The slightly thickened Sarnacol® T 660 adhesive can be thinned (after removing the film from the bucket) with Solvent T-660. Sarnacol® T 660 hardened adhesive can no longer be diluted or used. Add Solvent T-660 to the adhesive and mix well. Application as a cleaning agent: Soak a clean white cloth in Solvent T-660 and clean the membrane, tools or metal surfaces. Cloths should be changed frequently to avoid spreading dirt. When cleaning the heat-sealing area, a clean cloth will be used. Solvent T-660 must be completely evaporated prior to application of Sarnafil® T Prep Activator/Preparation for heat welding. CLEANING OF TOOLS Tools and equipment must be cleaned immediately after use. |